Overview
GT1000- Portable Gas detector is a KORNO brand Gas detection equipment, suitable for gas concentration detection in various industrial environments and special environments. The instrument adopts China electrochemistry/infrared absorption gas Sensor and microcontroller technology, which has the characteristics of fast Response Speed, High Measurement Accuracy, Good Stability and Repeatability. The performance of the whole machine ranks among the top in China. It has a built-in 4000mA large-capacity polymer rechargeable battery and a 3.5-inch full-view IPS industrial color screen. It supports functions such as Data storage, printing, export and temperature and Humidity detection.
Features
1. Using semiconductor nano process ultra-low power 32-bit microprocessor and 24-bit ADC data collection chip, Measurement accuracy is the highest level in the industry
2. Adopt 3.5 inch full view IPS industrial grade color screen, resolution is 320x480, good display technical indicators and gas concentration value
3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched
4. Simultaneous detection of 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, Temperature Humidity Sensor and Miscellaneous type Sensor
5. With Data storage function, 30,800 sets of data can be stored in a single channel, and historical data and export data can be viewed on the screen
6. With data printing function, it can be equipped with a micro printer to print data
7. With Temperature Humidity Detection Function, It Can Detect Gas Temperature Humidity Value in Field or Pipeline
8. Various modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode
9. Built-in powerful air pump, can work in micro negative pressure environment, air chamber design to ensure that the Sensor is not disturbed by pressure
10. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions
11. Full software Automatic calibration, Sensor up to 6 target point Adjustment, to ensure measurement accuracy and linearity, with data recovery function
12. Full Chinese/English operation menu, simple and practical
13. With temperature compensation function, dust-proof, waterproof design, equipped with dust Filter, can be used in various harsh occasions
Principle
The Gas detector adopts China electrochemistry/infrared absorption gas Sensor and microcontroller technology, and collects gas samples by pump-suction Sampling method with built-in powerful air pump. Sensor detects gas concentration and transmits the signal to the microprocessor for processing and display.
Applications
Industrial environment, special environment
Standards
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
Steps
Step 1 Start the instrument
2. Set detection mode, storage mode, printing mode, display mode, air pump mode and other parameters as needed
3. Carry out gas sampling
4. View real-time or historical data on the screen
5. Optional data export or printing function
6. Shut down after use
Notice
• Working ambient temperature range is -30~ 60 ℃
• Environmental humidity should be ≤ 95% RH, no condensation
• Operating Pressure Range -30~ 100Kpa
• Pay attention to dustproof and waterproof, and ensure that it is used under IP65 Protection Rating conditions
• Avoid overvoltage and overcharge, and the instrument has corresponding protection functions
Periodically calibrated to ensure measurement accuracy
• Use in intrinsically safe environments as specified in ExdII CT4
