Overview
GT1000-Portable Gas detector is a KORNO brand Gas detection equipment, suitable for gas concentration detection in various industrial environments and special environments. The instrument adopts China electrochemistry/infrared absorption gas Sensor and microcontroller technology, which has the characteristics of fast Response Speed, High Measurement Accuracy, Good Stability and Repeatability. It has a built-in 4000mA large-capacity polymer rechargeable battery and a 3.5-inch full-view IPS industrial color screen. It supports functions such as historical data viewing, storage, printing, export and temperature Humidity detection.
Features
1. Using semiconductor nano process ultra-low power 32-bit microprocessor and 24-bit ADC data collection chip, Measurement accuracy
2. Adopt 3.5-inch full-view IPS industrial-grade color screen, resolution 320x480, clear display
3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, and the high and low ranges can be automatically switched
4. Simultaneous detection of 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, Temperature Humidity Sensor, etc
5. With Data storage function, 30,800 sets of data can be stored in a single channel, and historical data can be viewed and exported
6. With data printing function, it can be equipped with a micro printer
7. With Temperature Humidity Detection Function, It Can Detect Gas Temperature Humidity in Site or Pipeline
8. Multiple modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode
9. Built-in powerful air pump, can work in a micro negative pressure environment, the air chamber design is reasonable
10. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions
11. Automatic calibration, Sensor supports 6-level target point calibrating, with data recovery function
12. Full Chinese/English operation menu, simple and practical
13. With temperature compensation function, dustproof and waterproof design, equipped with dust Filter, suitable for harsh occasions
Principle
The Gas detector adopts the pump-suction Sampling method, the gas is sucked into the detection gas chamber by the built-in powerful air pump, the gas concentration is detected by the China electrochemistry/infrared absorption gas Sensor, and the data is processed with the microcontroller technology to achieve Fast Response and High Accuracy measurement.
Applications
Various industrial environments, special environments
Standards
Explosion Mark ExdII CT4 (Intrinsically Safe), Protection Rating IP65
Steps
Step 1 Start the instrument
2. Set various parameters through the Chinese/English menu
3. Select detection mode and Miscellaneous related mode
4. Carry out gas sampling
5. Check the gas concentration value and various technical indicators displayed on the screen
6. View historical data, export data, or print data when needed
7. Shut down after use
Notice
• Working ambient temperature range is -30~ 60 ℃
• Environmental humidity should be ≤ 95% RH and no condensation
• Operating Pressure Range -30~ 100Kpa
• Pay attention to the Explosion-proof level and Protection Rating requirements of the instrument
Periodically calibrated to ensure measurement accuracy
• Pay attention to dustproof and waterproof when used in harsh environments
• Avoid strong static electricity and strong magnetic field interference
• Pay attention to the battery level and charge it in time.
