Please contact customer service
Can simultaneously detect 1-5 kinds of gases, Sensor any combination, support PM2.5, temperature and humidity Sensor. Built-in powerful air pump, can work in micro negative pressure environment, Protection Rating IP65, suitable for harsh occasions.
Category : Gas Detector
Brand : KORNO
SKU : NB032067
Service :The delivery and service By NBCLab.Com
GT-1000-H2S (0-100ppm) portable Gas detector is a KORNO brand product, suitable for gas concentration detection in various industrial environments and special environments. The instrument adopts imported electrochemistry/infrared absorption gas Sensor and microcontroller technology, with fast Response speed, high Measurement accuracy, Good Stability and Repeatability, etc. The whole machine performance ranks among the top domestic levels. Built-in 4000mA large-capacity polymer rechargeable battery, long battery life; equipped with a 3.5-inch full-view IPS industrial color screen, which can clearly display various technical indicators and gas concentration values, and supports functions such as historical data viewing, storage, printing, export and temperature and humidity detection.
1. Using new semiconductor nano process ultra-low power 32-bit microprocessor and 24-bit ADC data collection chip, Measurement accuracy is high. 2. Adopt 3.5-inch full-view IPS industrial-grade color screen (resolution 320x480), the display is clear and intuitive. 3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched. 4. Can detect 1-5 kinds of gases at the same time, Sensor supports any combination, compatible with PM2.5 dust particle Sensor, temperature and humidity Sensor and other types of Sensors. 5. With data storage function (30,800 sets of data can be stored in a single channel), it supports on-screen viewing of historical data and data export. 6. With data printing function, it can be connected to a micro printer. 7. Equipped with temperature and humidity detection function, it can detect the temperature and humidity value of gas in the field or pipeline. 8. A variety of working modes can be adjusted, including detection mode, storage mode, printing mode, display mode, air pump mode. 9. Built-in powerful air pump, can work in a micro negative pressure environment, the air chamber design is reasonable, can ensure that the Sensor is not disturbed by pressure. 10. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions. 11. Support full software Automatic calibration, Sensor has up to 6 levels of target point Adjustment to ensure measurement accuracy and linearity, and has data recovery function. 12. Provide full Chinese/English operation menu, simple and practical. 13. With temperature compensation function, dust-proof, waterproof design, equipped with dust Filter, suitable for various harsh occasions.
The gas detector adopts the pump-suction Sampling method, and the gas to be tested is sucked into the air chamber inside the instrument through a built-in powerful air pump. The core of the instrument adopts imported electrochemistry/infrared absorption gas Sensor, combined with the new semiconductor nano-process ultra-low power consumption 32-bit microprocessor and 24-bit ADC data collection chip, to carry out High Accuracy acquisition and processing of gas concentration signals. The microcontroller analyzes and calculates the signal, and finally displays the gas concentration value (supports PPM,% VOL, mg/m3, mg/L and other units) and environment temperature and humidity in real time on the 3.5-inch IPS industrial color screen, and can store or output data according to the settings.
It is suitable for gas concentration detection in various industrial environments and special environments.
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
1. Check whether the Appearance and accessories are in good condition before starting. 2. Press the power button for a long time to turn it on, and the instrument will self-test. 3. Set the required detection mode, storage mode, printing mode, display mode, air pump mode and other parameters through the Chinese/English menu. 4. Place the sampling probe in the environment or pipeline to be tested, and the instrument is detected by built-in pump suction sampling. 5. Read the gas concentration (unit can be switched) and temperature and humidity data in real time on the 3.5-inch color screen. 6. Historical storage data can be viewed through the on-screen menu. 7. When necessary, you can transfer data to external devices through the data export function, or connect a micro printer for data printing. 8. Turn off the machine after use and clean and maintain the instrument. 9. Periodically perform full software Automatic calibration or Sensor multi-point calibrating according to the instructions to ensure measurement accuracy.
* Do not use under conditions exceeding the working environment temperature (-30~ 60 ° C) or humidity (≤ 95% RH, no condensation). * The working air pressure range of the instrument is -30~ 100Kpa, please do not use it in a pressure environment beyond this range. Pay attention to the explosion-proof marking of the instrument (ExdII CT4), please use it in the specified explosion-proof area. * The built-in battery is a 4000mA rechargeable polymer battery, please use the matching charger and pay attention to the overcharge protection function. * The instrument adopts dustproof and waterproof design (IP65), but it should still avoid long-term immersion or extreme dust environment when using, and ensure that the dust Filter is clean. * Sensor calibrating needs to be carried out according to the operating procedures, using the instrument's 6-level target point Adjustment to ensure accuracy. * When using the built-in air pump in a micro-negative pressure environment, make sure that the air path is tightly connected to prevent leakage from interfering with the measurement. Avoid strong static electricity or magnetic field interference in the instrument. When transporting and storing, avoid severe vibrations and impacts. Non-professional personnel should not disassemble or repair the instrument.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
