Please contact customer service
Can simultaneously detect 1-5 kinds of gases, Sensor any combination, range 0-50% Vol, resolution 0.01% Vol. Built-in powerful air pump, support micro negative pressure environment work, with data storage, printing, temperature and humidity detection and a variety of protection functions.
Category : Gas Detector
Brand : KORNO
SKU : NB032079
Service :The delivery and service By NBCLab.Com
GT1000 - Portable Gas detector, suitable for gas concentration detection in various industrial environments and special environments. The instrument adopts imported electrochemistry/infrared absorption gas Sensor and microcontroller technology. Response speed is fast, Measurement accuracy is high, Stability and Repeatability are good, and the whole machine performance ranks among the top domestic levels. The parameters can be customized by users, and the operation is simple. Built-in 4000mA large capacity polymer rechargeable battery, long standby; adopts 3.5 inch full view IPS industrial color screen, which can display various technical indicators and gas concentration values well. Historical data can be viewed on the screen. It has functions such as storage, data printing, data export, temperature and humidity detection.
1. Using a new semiconductor nano process ultra-low power 32-bit microprocessor, 24-bit ADC data collection chip, Measurement accuracy is the highest level in the industry. 2. Adopt 3.5-inch full-view IPS industrial-grade color screen with a resolution of 320x480, which can well display the technical indicators and gas concentration values of the instrument. 3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched. 4. Simultaneous detection of 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, temperature and humidity Sensor, other types of various Sensors. 5. With data storage function, a single channel can store 30,800 sets of data, historical data can be visually viewed on the screen, and data can be exported. With data printing function, it can be equipped with a micro printer to print data. With temperature and humidity detection function, it can detect the temperature and humidity value of gas in the field or pipeline. 6. Various modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode. 7. Built-in strong air pump, can work in a micro negative pressure environment, reasonable air chamber design can ensure that the Sensor is not disturbed by pressure. 8. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions. 9. Automatic calibration, Sensor up to 6 target point Adjustment, ensure the accuracy and linearity of measurement, and have data recovery function. 10. Full Chinese/English operation menu, simple and practical. 11. With temperature compensation function, the instrument adopts dustproof and waterproof design, equipped with dust Filter, which can be used in various harsh occasions.
The portable gas detector uses a pump-suction Sampling method to suck the gas to be tested into the inside of the instrument through a built-in powerful air pump. After the gas enters a reasonably designed gas chamber, it is detected by an imported electrochemistry or infrared absorption gas sensor, which converts the gas concentration signal into an electrical signal. These signals are processed, analyzed and calculated by a 24-bit ADC data collection chip and a 32-bit microprocessor. Finally, the gas concentration value, temperature and humidity information are displayed on the 3.5-inch IPS industrial color screen, and can be stored or output according to the settings.
Suitable for gas concentration detection in various industrial environments and special environments.
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
1. Power on: Long press the power button to start the instrument. 2. Mode settings: Select and adjust the detection mode, storage mode, printing mode, display mode, air pump mode, etc. through the menu. 3. Unit switching: Switch concentration units freely between PPM,% VOL, mg/m3, mg/L as needed. 4. Start detection: place the instrument sampling probe in the environment to be tested, and the instrument automatically pumps gas and detects. 5. Data viewing: View gas concentration, temperature and humidity values in real time on the screen, or enter the historical data menu to view the stored data. 6. Data export/printing: Connect the computer to export data through a data cable, or connect the micro printer to print data. 7.Calibrate: Automatic calibration with full software, calibrate the Sensor with up to 6 target points to ensure accuracy. 8. Shutdown: After completing the detection, press the power button to shut down.
• The working environment temperature of the instrument is -30~ 60 ° C, the humidity is ≤ 95% RH and there is no condensation. Please do not use it in an environment beyond this range. • The working air pressure range is -30~ 100Kpa to ensure that the instrument can work normally in a micro-negative pressure environment. • The instrument is marked explosion-proof (ExdII CT4), but it must still be used safely within the specified explosion-proof area. • Note that the Protection Rating of the instrument is IP65, which can be dustproof and waterproof, but it is equipped with a dust filter, and maintenance should also be paid attention to when used in harsh situations. • Built-in 4000mA rechargeable polymer battery, please use the matching charger to charge, and pay attention to the overcharge protection function. • When calibrating, use standard gas and strictly follow the operating procedures to ensure measurement accuracy. • The instrument has a data recovery function, but it is recommended to export important data regularly for backup. • Avoid strong static or magnetic field interference in the instrument. • When not in use for a long time, please charge it regularly to maintain battery performance.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
