Overview
GT1000-Portable Gas detector, suitable for gas concentration detection in various industrial environments and special environments, adopts imported electrochemistry/infrared absorption gas Sensor and microcontroller technology, Fast Response Speed, High Measurement Accuracy, Good Stability and Repeatability. The instrument has built-in 4000mA large capacity polymer rechargeable battery, adopts 3.5 inch full viewing angle IPS industrial color screen, with storage, data printing, data export, temperature and humidity detection and other functions, simple operation.
Features
1. Using new semiconductor nano process ultra-low power 32-bit microprocessor, 24-bit ADC data collection chip, Measurement accuracy is high.
2. Adopt 3.5-inch full-view IPS industrial-grade color screen, the resolution is 320x480, and the display is clear.
3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched.
4. Simultaneously detect 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, temperature and humidity Sensor, etc.
5. With data storage function, a single channel can store 30,800 sets of data, historical data can be viewed on the screen, data can be exported, and data can be printed with a micro printer.
6. With temperature and humidity detection function, it can detect the temperature and humidity value of gas in the field or pipeline.
7. Various modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode.
8. Built-in strong air pump, can work in a micro negative pressure environment, the air chamber design is reasonable.
9. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions.
10. Automatic calibration, Sensor up to 6 target point Adjustment, to ensure the accuracy and linearity of measurement, with data recovery function.
11. Full Chinese/English operation menu, simple and practical.
12. With temperature compensation function, the instrument adopts dustproof and waterproof design, equipped with dust Filter, which can be used in various harsh occasions.
Principle
Gas detector adopts imported electrochemistry/infrared absorption gas Sensor to detect target gas concentration, and processes Sensor signal through microcontroller technology to achieve Fast Response and High Accuracy measurement.
Applications
Industrial environment, special environment
Standards
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
Steps
Step 1 Power on.
2. Set detection mode, storage mode, printing mode, display mode, air pump mode, etc. as needed.
3. Conduct testing.
4. Live or historical data can be viewed on the screen.
5. Data can be exported or printed by connecting a micro printer.
6. Shut down after use.
Notice
* Please use within the range of instrument working environment temperature (-30~ 60 ℃) and humidity (≤ 95% RH, no condensation).
The working air pressure range is -30~ 100Kpa.
* Please pay attention to the explosion-proof mark of the instrument (ExdII CT4), and use it in the specified explosion-proof environment.
* The instrument has a Protection Rating of IP65, but it is still necessary to pay attention to the use environment to avoid exceeding its protection capacity.
Periodically calibrated to ensure measurement accuracy.
* Please use the matching charger to charge the built-in 4000mA rechargeable polymer battery, and pay attention to the overcharge protection function.
* The instrument is equipped with Dust Filter, please pay attention to maintenance when using in harsh environments.
