Overview
GT1000-Portable Gas detector, suitable for gas concentration detection in various industrial environments and special environments, adopts imported electrochemistry/infrared absorption gas Sensor and microcontroller technology, Fast Response Speed, High Measurement Accuracy, Good Stability and Repeatability. Built-in 4000mA large capacity polymer rechargeable battery, adopts 3.5 inch full view IPS industrial color screen, with storage, data printing, data export, temperature and humidity detection and other functions.
Features
1. Using new semiconductor nano process ultra-low power 32-bit microprocessor, 24-bit ADC data collection chip, Measurement accuracy is high.
2. Adopt 3.5-inch full-view IPS industrial-grade color screen, the resolution is 320x480, and the display is clear.
3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched.
4. Simultaneously detect 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, temperature and humidity Sensor, etc.
5. With data storage function, a single channel can store 30,800 sets of data, historical data can be viewed on the screen, data can be exported, and data can be printed with a micro printer.
6. With temperature and humidity detection function, it can detect the temperature and humidity value of gas in the field or pipeline.
7. Various modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode.
8. Built-in powerful air pump, can work in a micro negative pressure environment, reasonable air chamber design can ensure that the Sensor is not disturbed by pressure.
9. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions.
10. Automatic calibration, Sensor up to 6 target point Adjustment, ensure the accuracy and linearity of measurement, and have data recovery function.
11. Full Chinese/English operation menu, simple and practical.
12. With temperature compensation function, the instrument adopts dustproof and waterproof design, equipped with dust Filter, which can be used in various harsh occasions.
Principle
Imported electrochemistry/infrared absorption gas Sensor is used to detect the target gas concentration, and the Sensor signal is processed by microcontroller technology to achieve Fast Response and High Accuracy measurement.
Applications
Industrial environment, special environment
Standards
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
Steps
Step 1 Power on.
2. Set various parameters (such as detection mode, storage mode, etc.) through the full Chinese/English operation menu.
3. Conduct sampling.
4. View real-time or historical data on the screen.
5. You can choose to export or print the data.
6. Charge after use.
Notice
• Please use the instrument in the working environment specified in the manual (temperature -30~ 60 ℃, humidity ≤ 95% RH without condensation, air pressure -30~ 100Kpa).
• The instrument is explosion-proof and labeled ExdII CT4 (intrinsically safe), but still needs to be operated under safety regulations.
• Instrument Protection Rating is IP65, with certain dustproof and waterproof ability, equipped with dust filter, but still need to avoid abuse in extremely harsh conditions.
• The instrument has a built-in 4000mA rechargeable polymer battery, please pay attention to the overcharge protection function and charge it according to the specifications.
• Make sure the Sensor is calibrated before use to ensure measurement accuracy.
• The instrument has a data recovery function, but it is recommended to export important data for backup in time.
