Overview
GT1000-Portable Gas detector, suitable for gas concentration detection in various industrial environments and special environments, adopts imported electrochemistry/infrared absorption gas Sensor and microcontroller technology, Fast Response Speed, High Measurement Accuracy, Good Stability and Repeatability. Built-in 4000mA large capacity polymer rechargeable battery, adopts 3.5 inch full view IPS industrial color screen, with storage, data printing, data export, temperature and humidity detection and other functions.
Features
1. Using a new semiconductor nano process ultra-low power 32-bit microprocessor, 24-bit ADC data collection chip, Measurement accuracy is the highest level in the industry.
2. Adopt 3.5-inch full-view IPS industrial-grade color screen with a resolution of 320x480, which can well display the technical indicators and gas concentration values of the instrument.
3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched.
4. Simultaneous detection of 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, temperature and humidity Sensor, other types of various Sensors.
5. With data storage function, a single channel can store 30,800 sets of data, historical data can be visually viewed on the screen, and data can be exported. With data printing function, it can be equipped with a micro printer to print data. With temperature and humidity detection function, it can detect the temperature and humidity value of gas in the field or pipeline.
6. Various modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode.
7. Built-in strong air pump, can work in a micro negative pressure environment, reasonable air chamber design can ensure that the Sensor is not disturbed by pressure.
8. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions.
9. Automatic calibration, Sensor up to 6 target point Adjustment, ensure the accuracy and linearity of measurement, and have data recovery function.
10. Full Chinese/English operation menu, simple and practical.
11. With temperature compensation function, the instrument adopts dustproof and waterproof design, equipped with dust Filter, which can be used in various harsh occasions.
Principle
Sampling method, built-in powerful pumping pump, can work in a micro negative pressure environment. Gas concentration is detected by imported electrochemistry/infrared absorption gas Sensor, and data is processed by microcontroller technology to achieve Fast Response and High Accuracy measurement.
Applications
Various industrial environments, special environments
Standards
ExdII CT4 (intrinsically safe)
Steps
Step 1 Power on.
2. Adjust the detection mode, storage mode, printing mode, display mode, air pump mode, etc. as needed.
3. Carry out measurements.
4. Live or historical data can be viewed on the screen.
5. Data can be exported or connected to a micro printer to print data.
Notice
The working environment temperature is -30~ 60 ℃.
• Working environment humidity should be ≤ 95% RH, no condensation.
• The working air pressure range is -30~ 100Kpa.
• The instrument has an explosion-proof mark and is suitable for the corresponding explosion-proof environment.
• The instrument is designed to be dustproof and waterproof, with a Protection Rating of IP65, but care should be taken to avoid extreme conditions when using it.
• Please ensure that the battery is fully charged before use.
• Do not use in an environment beyond the range.
Periodically calibrated to ensure measurement accuracy.
