Overview
GT1000-Portable Gas detector, suitable for gas concentration detection in various industrial environments and special environments. The instrument adopts imported electrochemistry/infrared absorption gas Sensor and microcontroller technology, with fast Response speed, high Measurement accuracy, good Stability and Repeatability, and the whole machine performance ranks among the top in China. Built-in 4000mA large capacity polymer rechargeable battery, adopts 3.5 inch full view IPS industrial color screen, with storage, data printing, data export, temperature and humidity detection and other functions.
Features
1. Using new semiconductor nano process ultra-low power 32-bit microprocessor, 24-bit ADC data collection chip, Measurement accuracy is high.
2. Adopt 3.5-inch full-view IPS industrial-grade color screen, the resolution is 320x480, and the display is clear.
3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched.
4. Simultaneously detect 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, temperature and humidity Sensor, etc.
5. With data storage function, a single channel can store 30,800 sets of data, historical data can be viewed on the screen, data can be exported, and data can be printed with a micro printer.
6. With temperature and humidity detection function, it can detect the temperature and humidity value of gas in the field or pipeline.
7. Various modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode.
8. Built-in powerful air pump, can work in a micro negative pressure environment, reasonable air chamber design to ensure that the Sensor is not disturbed by pressure.
9. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions.
10. Automatic calibration, Sensor up to 6 target point Adjustment, ensure the accuracy and linearity of measurement, and have data recovery function.
11. Full Chinese/English operation menu, simple and practical.
12. With temperature compensation function, the instrument adopts dustproof and waterproof design, equipped with dust Filter, which can be used in various harsh occasions.
Principle
The instrument adopts the pump-suction Sampling method with a built-in strong air pump, which can work in a micro-negative pressure environment. The target gas concentration is detected by the imported electrochemistry/infrared absorption gas Sensor, and the data processing is combined with the microcontroller technology to achieve Fast Response and High Accuracy measurement. The instrument is equipped with a temperature and humidity Sensor, which can simultaneously detect the temperature and humidity of the environment.
Applications
Suitable for gas concentration detection in various industrial environments and special environments.
Standards
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
Steps
Step 1 Power on.
2. Adjust the detection mode, storage mode, printing mode, display mode, air pump mode, etc. as needed.
3. Gas detection, the instrument automatically samples and displays the concentration value.
4. Historical data can be viewed on the screen.
5. You can export data through the data export function, or connect a micro printer to print data.
Notice
* Working environment temperature is -30~ 60 ℃, humidity ≤ 95% RH, no condensation.
The working air pressure range is -30~ 100Kpa.
* The instrument adopts dustproof and waterproof design, but it is still necessary to avoid extreme harsh environment when using.
Periodically calibrated to ensure measurement accuracy.
Pay attention to the battery level and charge it in time.
Please read the instructions carefully before use to ensure correct operation.
