Please contact customer service
Using microcomputer control and hydraulic afterburner, the test accuracy is +/- 1%, and the force value resolution is 1/200000. With liquid crystal display of force value, automatic exchange of three units, overload protection and automatic printing functions, it can store 10 sets of data and automatically calculate the average value and fracture value.
Category : Tensile Testing Machine
Brand : AISRY
SKU : NB032262
Service :The delivery and service By NBCLab.Com
AISRY microcomputer horizontal tensile strength testing machine model ASR-1002 (100kg) is a precision testing equipment using hydraulic afterburner and microcomputer control. It has the characteristics of computer automatic data collection, printing results, easy operation, high test accuracy and smooth afterburner. It is suitable for tensile, tensile shear, tear and other mechanical properties tests of metal and Non-metallic materials. It can meet ISO, GB and other test methods and standards. It is widely used in Wire and cable industries and Quality inspection organizations at all levels.
1. Appearance design is exquisite. 2. The force value is displayed by digital liquid crystal display, which can distinguish the tension or pressure, and the interface is clear and easy to read. 3. Support N, Kgf, Lbf three measurement units, and can be automatically interchanged. 4. LCD liquid crystal display with backlighting, can be used in an environment with insufficient rays of light. 5. A single measurement can read the peak value in both pulling and pressing directions, and supports automatic and manual clearing. 6. With travel limit and overload stop function. 7. Adopting a tabletop single column structure, the seating operation is easy and natural. 8. The machine is equipped with a thermal printer, which can automatically output test results. 9. It can store the results of 10 test reference points, automatically calculate the average value, and automatically capture the maximum value and the force value at fracture. 10. Adopt PK-2000 dark blue LCD screen Chinese display and film touch key, rich in functions, including: single test and manual 10-point statistics, multi-unit automatic switching, free point picking, multi-function correction, automatic printing, 24-bit High Accuracy AD acquisition, adjustable decimal places, boot password protection, breakpoint ratio can be set and overload protection function.
The testing machine uses a hydraulic system to apply force, and collects force value data during the test in real time through High Accuracy Sensor (force value resolution up to 1/200000). The data is processed by the microcomputer control system and displayed in real time on the LCD screen. The system can control the operation of the power system (speed-regulating motor) according to the set test speed (0~ 300mm/min) to complete tests such as stretching, tensile shear or tearing. The test results can be automatically calculated, stored and output through the micro printer.
Wire and cable industry, product mass supervision and inspection institutions at all levels
ISO、GB
1. Turn on the power supply (AC220V, 50/60Hz). 2. According to the test requirements, install the appropriate tensile fixture. 3. Turn it on through the film touch mold key, and enter the power-on password (if set). 4. Set test parameters on the Chinese LCD interface, such as test speed, Measurement unit, breakpoint ratio, etc. 5. Place the specimen correctly in the fixture. 6. Start the test, and the equipment automatically performs afterburner and data collection. 7. Automatic shutdown after the test reaches the set conditions (e.g. break, overload, or travel limit). 8. Check the test results (peak, average, etc.) displayed on the LCD screen. 9. Use the onboard thermal printer to automatically print the test report. 10. After the test, clean the table and store the test data if necessary.
• Power supply voltage meets requirements (1PH, AC220V) before operation. • Do not turn it on for non-operators, and the device has the function of power-on password protection. • When clamping the test piece, make sure that the test piece is firm and placed in the center to prevent partial loading. • Please set the breakpoint ratio (0~ 99%) reasonably according to the test piece material to achieve proper fracture stop. Do not exceed the rated capacity of the equipment (100kg), and set the overload protection value reasonably. • When the equipment is running, please pay attention to the up and down stroke limiting device to ensure safety. In case of emergency, please use the emergency shutdown device immediately. • Regularly maintain and calibrate equipment to ensure test accuracy (Measurement accuracy +/- 1%). • Keep the working environment of the equipment clean and avoid use in a strong electromagnetic interference environment.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
