Please contact customer service
Capacity 500Kg, Force Precision < +/- 0.5%, Data sampling Frequency 200 times/second, can automatically calculate the average value and grab MAX Maximum, support breakpoint ratio setting, compact structure can be placed directly on the ground for use.
Category : Tensile Testing Machine
Brand : AISRY
SKU : NB032264
Service :The delivery and service By NBCLab.Com
AISRY ASR-1021-2 (500KG) Touch Screen Single Column Tensile Strength Testing Machine is a device for testing the mechanical performance of materials. It is suitable for testing non-metallic materials such as rubber, plastics, Wire and cable, Spinning & weaving, Water proofer, non-woven fabrics and metal wires, metal foils, metal plates and metal rods. It is also suitable for tensile, compression, disbonding, shearing and tearing tests of various finished products with special fixtures to determine product mass. The machine is simple in structure and easy to operate. It can be directly placed on the studio floor for testing. It is especially suitable for testing instruments for controlling product mass online production.
1. Touch screen operation interface, optional built-in thermal printer to automatically output test results. 2. It can store the results of 10 test reference points, automatically calculate the average value, and automatically capture the MAX Maximum and the strength value at break. 3. The unit of force value can be switched between Kg, lb, and N. The force value has high resolution and the whole resolution remains unchanged. 4. The test speed range is wide (100~ 500mm/min), and the effective stretching space is large (1200mm, 850mm with a powerful clamp). 5. It has safety and intelligent functions such as up and down stroke limiting device, overload protection (automatic protection exceeding the maximum load by 10%) and user-settable breakpoint ratio (0~ 99%). 6. Compact structure, can be directly placed on the ground for use.
The testing machine controls the movement of the beam through the drive system, and applies forces such as stretching and compression to the specimen installed on the fixture. The High Accuracy Load Sensor detects the change of force value in real time, and the displacement Sensor measures the deformation amount. The data is sampled at a frequency of 200 times/second and transmitted to the touch screen controller for processing. The system automatically calculates and records the key data in the test process, such as the maximum force value, the fracture force value, etc. according to the setting program, to evaluate the mechanical properties of the material.
Rubber, Plastic, Wire and cable, Spinning & weaving, Water proofer, Non-metallic materials such as non-woven fabrics, Wire, Foil, Sheet metal, Metal rod, Finished product tensile test, Finished product compression test, Finished product disbonding test, Finished product shear test, Finished product tear test
The data did not mention specific compliance criteria.
1. Place the device on a stable ground and connect it to a 220V/50Hz power supply. 2. According to the type of material tested, install the corresponding tensile or compression fixture. 3. Set the test parameters on the touch screen, such as test speed, breakpoint ratio, etc., and select the force value unit. 4. Clamp the specimen correctly on the fixture. 5. Start the test, and the device will run automatically and apply force. 6. After the test is completed, the device automatically stops, and the screen displays and stores the test results (such as MAX Maximum, break value, average value, etc.). 7. If you need to print the report, it can be output through the optional thermal printer.
Please ensure that the equipment is placed on a stable, level floor for use. Before connecting the power supply, make sure the voltage is 220V/50Hz and ensure good grounding. Select the appropriate fixture according to the sample type and test requirements, and ensure that the clamping is firm to prevent the sample from slipping. Before testing, set the parameters correctly, especially the breakpoint ratio, to adapt to the fracture characteristics of different materials. When the device is running, do not touch moving parts or samples to ensure safety. When the load exceeds 10% of the maximum capacity (500Kg), the equipment will automatically shut down. Do not overload it. Maintain and calibrate equipment regularly to ensure test accuracy. * Optional printer functions, please select on demand.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
