Please contact customer service
It has three test modes of strength, fixed value and stacking, supports maximum 2T capacity and 1-level accuracy, adopts microcomputer control and High Accuracy ball screw, and automatically judges the crushing force and saves the data after the test.
Category : Compression Strength Tester
Brand : AISRY
SKU : NB032270
Service :The delivery and service By NBCLab.Com
AISRY ASR-1000 carton Compressive tester is a basic instrument for corrugated box compressive strength performance testing, which belongs to Encasement testing equipment. It is suitable for all kinds of corrugated boxes compressive strength test, standard test and stacking strength test.
1. After the test is completed, it has an automatic return function, which can automatically determine the crushing force and automatically save the test data. 2. Provide three adjustable speeds, using a full Chinese LCD display operation interface, and provide a variety of units to choose from. 3. You can enter relevant data and automatically convert the compressive strength, with its own Encasement stacking test function; you can directly set the force and time, and automatically stop after the test is completed. 4, with three working modes: strength test (measurement of the maximum pressure of the box), fixed value test (according to the set pressure to detect the overall performance of the box), stacking test (according to the requirements of the national standard for 12 hours, 24 hours and other different conditions of stacking test). 5. Using a 32-bit embedded processing chip, the instruction cycle is fast. 6. Measurement accuracy > 4 gears, that is, resolution > 20000 yards. 7. Use software coefficient sub-file calibration (correction) to effectively correct Sensor linearity. 8, using 4 times the frequency of the photoelectric encoder positive and negative bidirectional counting, high resolution. 9. Display a large-screen monochrome LCD with a 192 × 64 dot matrix, providing rich information display. 10. Equipped with 1 RS232 serial port and 1 print parallel port, it can be connected to Miscellaneous equipment or printers. 11. Equipped with 8 control buttons (5 function keys, 3 multiplex keys), the operation is simple. 12. At the end of the test, the maximum power during the test can be automatically displayed and memorized. 13. Up to 20 test results can be recorded.
The testing machine drives the AC variable frequency motor to drive the High Accuracy ball screw through the microcomputer control system, so that the pressure plate applies pressure to the corrugated box sample. The system pressurizes at an adjustable speed according to the set working mode (intensity, set value or stacking), and monitors the force and displacement in real time through the High Accuracy Sensor and the photoelectric encoder. Automatic shutdown when preset conditions (such as maximum pressure, set time or sample destruction) are reached, and relevant test data is recorded, displayed and saved.
Corrugated box compressive strength performance testing, Encasement transport parts pressure test, Encasement transport parts static load stacking test
GB/T 4857.4-92 Encasement Transport Encasement Parts, Pressure Test Method, GB/T 4857.3-92 Encasement Transport Encasement Parts, Static Load Stacking Test Method
1. Turn on the power supply (AC220V/50HZ~ 60HZ). 2. Select the desired working mode (strength test, fixed value test or stacking test) through the LCD screen and buttons. 3. According to the selected mode, set the corresponding parameters (e.g. pressurization speed, target pressure, test time, etc.). 4. Place the corrugated carton specimen in the center of the platen. 5. Start the test and the equipment starts to automatically pressurize. 6. After the test reaches the end condition (e.g. crushing, reaching the set value or time), it will automatically stop and return to position. 7. View the test data (e.g. maximum power) automatically displayed and saved on the LCD screen. 8. Output data can be connected to external devices through RS232 serial or print parallel ports.
Please ensure that the power supply is AC220V/50HZ~ 60HZ, and pay attention to power safety. When placing the sample, ensure that it is located in the center of the platen to ensure the accuracy of the test. The equipment is equipped with overload protection and limit protection devices, but it still needs to be used within the rated capacity (e.g. 0~ 2T) range. Please do not overload. Emergency stop button can be used in case of emergency. * Regular maintenance of High Accuracy ball screws and other mechanical components. * Machine weight about 350KG, handling and installation should pay attention to safety. * Chinese and English languages can be exchanged through the software. Capacity can be customized according to customer requirements, and requirements need to be clarified when purchasing.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
