Overview
The Ring Pressure Sampler is a special sampling device under the JINGHUAYIQI brand, model LD-HYQ-01, dedicated to Cardboard Ring Crush Test (RCT) and Corrugated Core Paper Flat Crush Test (CMT). This Sampler has the advantages of high sampling accuracy and easy operation. It is a satisfactory test aid for industries and departments such as papermaking, Encasement, scientific research, and Quality control. Its blade combination is precise, and it can cut samples for ring pressure or Miscellaneous test to ensure that the edge of the sample is flat.
Features
1. High sampling accuracy
2. Easy to operate
3. The blade combination is precise to ensure that the edge of the sample is flat
4. Dedicated to Ring Crushing Test and Compressive Strength Test
Principle
The Sampler is used for Ring Crush Test (RCT) and Corrugated Core Flat Crush Test (CMT) to ensure that the edge of the sample is flat and meets the test requirements.
Applications
Papermaking, Encasement, Research, Quality control
Standards
TAPPI-T409、JIS-P8113
Steps
1. Preparation of materials to be sampled
2. Place the material on the Sampler bench
3. Adjust the Sampler to the desired size (e.g. 152 × 12.7mm ring press or (200~ 250) × 15mm stretch, fold-resistant)
4. Operation Sampler for cutting
5. Remove the cut specimen and check for Edge Smoothness
Notice
• Ensure that the Sampler blade is sharp and precisely combined before use
• Pay attention to safety during operation and avoid hand contact with the blade
• Regularly check the sampling accuracy and calibrate if necessary
• Keep equipment clean to prevent debris accumulation from affecting performance
• Only for specified materials and tests, do not use beyond the scope
