Overview
The NANOUP NU-MFPE-D10 is a single 10mm Spreader head, which is one of the important modules of the desktop Spreader system. The product includes a gasket, which can be used with the desktop Spreader system host of S300, S400, S500 and other models for precision Spreader on the substrate.
Features
The width of a single Spreader is 10mm, suitable for small-size precision Spreaders.
2. The product includes gaskets for easy installation and adjustment.
3. It can be used with various NANOUP desktop Spreader system hosts (such as S300, S400, S500).
4. The brand offers a variety of specifications of Spreader heads and high-precision gaskets (such as 30, 50, 70, 100μm) to meet different Spreader Film thickness requirements.
Principle
The Spreader head acts as the execution part of the Spreader system. Under the host drive, the slurry is uniformly coated on the surface of the substrate by precisely controlling the Spreader gap (determined by the film thickness of the gasket) and the traverse speed.
Applications
Laboratory R & D, New material prepative, Electronic Device Manufacturing, Thin Film Spreader
Standards
The information does not mention
Steps
1. Install the Spreader header on a compatible desktop Spreader system host (e.g. S300, S400, S500).
2. According to the required Spreader Film thickness, select the appropriate precision gasket (such as 30, 50, 70, 100 μm) for installation or adjustment.
3. Connect the ink injection system to supply slurry to the Spreader head.
4. Set Spreader parameters (such as speed and travel) on the host control interface.
5. Start the Spreader program and perform the Spreader operation.
Notice
Please ensure that the Spreader header is compatible with the host model (e.g. S300, S400, S500).
* According to the requirements of Spreader Film thickness, correctly select and install the precision gasket corresponding to Film thickness.
* Before operation, please confirm that the ink injection system is connected normally and the slurry supply is smooth.
* Use the recommended torque wrench and other tools for installation and adjustment to ensure accuracy.
* Regularly clean the Spreader head to prevent the slurry from drying and clogging.
Customized Miscellaneous Spreader modules (e.g. high-precision flat scraper, ultrasonic spray head) can be consulted with brands to meet specific needs.
