Overview
NANOUP NU-MFPE-D50 single frame 50mm Spreader head is a precision Spreader module specially designed for desktop Spreader systems, including gaskets, suitable for S300, S400, S500 series hosts.
Features
1. The width of a single Spreader is 50mm, suitable for medium-sized Spreaders.
2. The product contains high-precision gaskets, and different Film thicknesses (such as 30, 50, 70, 100 μm) can be selected according to needs.
3. As a modular component, it can be used flexibly with the NANOUP S series desktop Spreader system host.
4. Support customization to meet the user's specific Spreader process requirements.
Principle
The Spreader head acts as the execution part of the Spreader system, and controls the spread of the Spreader liquid through a precise mechanical structure under the drive of the host. Its built-in gasket is used to precisely set the Spreader gap to ensure the uniform thickness of the Spreader Film. The Spreader liquid forms a uniform liquid film between the Spreader head and the substrate, thereby achieving High Accuracy Film Spreader.
Applications
It is suitable for R & D and production fields that require precision film Spreaders, such as new energy materials, electronic films, Optical inspection films, functional coatings, laboratory sample prepatives, etc.
Standards
The data did not mention specific compliance criteria.
Steps
1. Install the NU-MFPE-D50 Spreader header on a compatible desktop Spreader system host (e.g. S300, S400, S500).
2. According to the target Spreader Film thickness, select the appropriate gasket (e.g. 30, 50, 70, 100 μm) and install it.
3. Connect the ink injection system and inject the liquid to be injected into the Spreader head.
4. Set Spreader parameters (such as speed, pressure, etc.) on the host control interface.
5. Place the substrate and start the Spreader program for Spreader.
6. After the Spreader is completed, clean the Spreader head in time.
Notice
* Please read the operation manual of the host and Spreader header carefully before use.
* According to the nature of the Spreader liquid and the target Film thickness, correctly select the gasket Film thickness.
When installing and replacing gaskets, be careful to avoid damaging the precision surface.
* After the Spreader is completed, the Spreader head should be thoroughly cleaned in time to prevent residue curing blockage.
* Please use matching tools (such as torque wrenches) for installation and debugging to ensure that the connection is tight and reliable.
Non-professionals should not disassemble the core components of the Spreader head by themselves.
* When storing, keep it clean and drying to avoid collisions.
