Overview
The single 100mm Spreader head (model NU-MFPE-D100) is a key Spreader module component of the NANOUP Desktop Spreader System, which includes a spacer and is designed for precision Spreader applications in laboratory or small-scale production environments.
Features
1. Provide a single 100mm standard Spreader width.
2. The product includes matching gaskets, which are convenient for installation and use.
As a modular component, it can be used with NANOUP-designated desktop Spreader system hosts (e.g. S300, S400, S500 series).
4. The brand provides a variety of single width Spreader heads from 10mm to 200mm, high-precision flat scraper, ultrasonic spray head and other Miscellaneous Spreader modules, which support customization to meet different needs.
Principle
The Spreader head acts as the execution part of the Spreader system, and uniformly coats the slurry on the surface of the substrate under the drive of the system host. Its working principle usually involves controlling the Spreader gap (determined by the gasket Film thickness) and traverse speed through precise mechanical structure to achieve precise regulation of wet film thickness and uniformity.
Applications
Laboratory research and development, small-scale trial production, New material coating prepative, Functional film Spreader
Standards
The data did not mention specific compliance criteria.
Steps
1. Install the Spreader header on a compatible desktop Spreader system host (e.g. S300, S400, S500).
2. According to the required wet film thickness, select the appropriate gasket (e.g. 30, 50, 70, 100 μm) and install it.
3. Spreader slurry is applied to the Spreader head or substrate by means of an ink injection system or Miscellaneous.
4. Set up and start the Spreader system host to perform Spreader operations.
5. After the Spreader is completed, clean the Spreader head as required.
Notice
Please ensure that the Spreader header model is compatible with the desktop Spreader system host you are using.
* According to the Spreader process requirements, correctly select and install the corresponding Film thickness gasket to control the Spreader gap.
* Pay attention to the uniformity and flowability of the slurry during operation to obtain a good Spreader effect.
* Cleaning and maintenance should be carried out in time after use to prevent slurry curing blockage.
Consult the vendor about the possibility of customizing the Miscellaneous Spreader width or module.
