Overview
NU-MFPE-D150 is a single 150mm Spreader head launched by NANOUP, which belongs to its desktop Spreader system series. The Spreader head contains a gasket and can be used with the desktop Spreader system host of S300, S400, S500 and other models for precision Spreader on the surface of the substrate.
Features
The width of a single Spreader is 150mm, suitable for medium-width Spreaders.
2. The product includes matching gaskets for easy installation and adjustment.
3. Compatible with various NANOUP desktop Spreader system hosts (such as S300, S400, S500).
4. As a modular component, it supports mating or customization with high-precision flat scraper, ultrasonic spray head and other Miscellaneous Spreader modules.
Principle
The Spreader head acts as an executive part of the Spreader system. By precisely controlling the Spreader gap (determined by the matching gasket Film thickness) and the Spreader speed, the liquid material (such as slurry) is uniformly coated on the moving substrate surface. Its working principle is based on precision Spreader technologies such as slot-die extrusion or scratch coating to achieve uniform film preparation.
Applications
Laboratory R & D, New material prepative, New Energy Battery Electrode Spreader, Functional Film Production, Photoelectric Display Material Spreader
Standards
The data did not mention specific compliance criteria.
Steps
1. Install the Spreader header on a compatible desktop Spreader system host (e.g. S300, S400, S500).
2. According to the required Spreader Film thickness, select the appropriate gasket (e.g. 30, 50, 70, 100 μm) to install on the Spreader head.
3. Connect the ink injection system and inject the slurry to be Spreader into the Spreader head.
4. Set Spreader parameters (such as speed, pressure, etc.) on the host control interface.
5. Place the substrate and start the Spreader program for Spreader.
6. After the Spreader is completed, clean the Spreader head in time.
Notice
• Please read the instructions of the host and Spreader header carefully before operation.
• According to the Spreader process requirements, accurately select and install the appropriate Film thickness gasket to control the Spreader gap.
• Ensure that the connection between the Spreader head and the host is stable, and the slurry delivery pipeline is smooth and leak-free.
• After the Spreader is completed, the Spreader head should be thoroughly cleaned immediately to prevent slurry curing blockage.
• Use matching tools (such as torque wrenches) for installation and disassembly to avoid damage to precision components.
• It is recommended to operate in a clean environment to reduce Spreader defects.
• Can contact suppliers for customization or integration of Miscellaneous Spreader modules (e.g. flat scraper, ultrasonic spray head).
