Overview
The OSP-100 L600φ 10mm Spreader rod is a precision Spreader tool manufactured by extrusion process, specially designed to control the amount of liquid Spreader. It is designed to replace the traditional steel wire scraping rod and solve the problems of easy loosening, broken wire, and difficult cleaning of steel wire. It is especially suitable for application scenarios that require ultra-thin Spreaders, with a minimum control of 1.5μm wet film thickness.
Features
1. With D-Bar design, the bottom of the groove is wider than that of traditional steel wire scrapers, usually providing a larger amount of Spreader.
2. Solve the problem of loose and broken wires that are prone to occur in traditional steel wire scrapers.
3. Easy to clean, not easy to clog.
4. Can achieve ultra-thin Spreader, wet film thickness control accuracy.
5. Specifications and lengths can be customized to meet different production requirements.
Principle
The working principle of the Spreader rod is to scrape off and precisely adjust the amount of liquid left on the substrate by its specific groove structure when the substrate surface Spreader liquid, thereby controlling the wet film thickness of the coating is formed.
Applications
Film: LCD film, X-ray film, Encasement film, etc., Glass: Automotive Glass, LCD Glass, Construction Glass, etc., Paper: Newspaper, Light, Wallpaper, Special Paper, etc., Encasement Material: Carton, Tape, Encasement Paper, etc., Tape: Video Tape, etc., Magnetic Card: Ticket, Recharge Card, etc
Steps
1. Spreader the liquid on the surface of the substrate.
2. Use the D-Bar Spreader to scrape across the surface of the liquid and adjust (scrape off) excess liquid to control the amount of Spreader.
Notice
- The specific specification length can be customized according to needs, and the details need to be consulted by customer service.
- Please pay attention to cleaning and maintenance before and after use to maintain the best performance.
