Overview
PINGXUAN YHJD-70-05L Magnetic Stir Low Temperature Thermostatic Bath is an experimental equipment that integrates low temperature thermostatic, high temperature thermostatic and magnetic Stir functions. Temperature range is -70~ 100 ℃, with domestic circulation function, suitable for experimental scenarios that require precise temperature control and uniform mixing of samples.
Features
Unique design of magnetic Stir system, Stir speed 0~ 1500rpm stepless adjustable, without external Stirrer.
2. The corrosion-resistant strong magnetic Stir can work stably for a long time to ensure uniform sample temperature and improve experimental accuracy.
3. Equipped with large screen LCD display, Temperature Stability, easy to operate.
4. With over-temperature alarm function, it can automatically cut off the load to ensure safety.
5. Support temperature measurement deviation correction, temperature accuracy up to 0.1 ℃.
6. It uses an effective fully enclosed Compressor for cooling, with fast cooling speed, low noise, and multiple protections for overheating and overcurrent.
7. With external circulation function, realize multi-purpose of one machine.
Principle
The device achieves precise temperature control in the tank through a fully enclosed Compressor refrigeration system and heating system. The built-in magnetic Stir system generates a swirl/spin magnetic field, which drives the corrosion-resistant magnetic Stir placed in the reaction vessel to synchronize the swirl/spin. Stir the thermostatic sample in the tank to make its temperature uniform.
Applications
Chemical synthesis, materials research, biopharmaceuticals, food testing, Petrochemicals
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Thermostatic bath inlet and outlet pipe connected to the external circulation line (if necessary).
3. Add an appropriate amount of heat transfer medium to the tank.
4. Place the container containing the sample and the Magnetic Stir into the tank.
5. Turn on the power and set the target temperature and Stir speed through the LCD screen.
6. Start the device, start thermostatic and Stir.
7. After the experiment, turn off the power of the equipment, and the liquid in the tank can be discharged through the drain valve.
Notice
• Before use, make sure that the equipment is well grounded and the Power supply voltage meets the requirements.
• The liquid level of the heat conducting medium in the tank should be kept within a reasonable range to avoid dry burning.
Do not touch internal moving parts or high/low temperature surfaces while the device is running.
• When performing external circulation, ensure that the pipeline connection is firm and there is no leakage.
• When the equipment alarms, please check and troubleshoot it immediately before using it.
• Regularly clean the surface of the equipment and the inside of the tank to keep the ventilated port open.
• When not in use for a long time, please empty the tank and store it properly.
