Overview
PINGXUAN YHJD-80-05L Magnetic Stir Low Temperature Thermostatic bath is an experimental equipment that integrates low temperature thermostatic, high temperature thermostatic and magnetic Stir functions. Temperature range is -80~ 100 ℃, with domestic circulation function, suitable for 500ml beaker capacity, compact design and easy operation.
Features
Unique design of magnetic Stir system, Stir speed 0~ 1500rpm stepless adjustable, can be directly on the sample Stir, without external Stirrer, easy to use and safe.
2. The corrosion-resistant strong magnetic Stir can be synchronized with the magnetic Stir system to keep the sample temperature uniform for a long time and improve the experimental accuracy.
3. Equipped with large screen LCD display, Temperature Stability, easy to operate.
4. With over-temperature alarm function, it can automatically cut off the load.
5. Support temperature measurement deviation correction, temperature accuracy up to 0.1 ℃, 0.01 ℃.
6. It uses an effective fully enclosed Compressor for cooling, with fast cooling speed, low noise, and multiple protections for overheating and overcurrent.
7. With external circulation function, realize multi-purpose of one machine.
Principle
The device achieves rapid cooling through a fully enclosed Compressor refrigeration system. Combined with the High Accuracy temperature control system, the temperature of the liquid in the tank is precisely controlled within the set range (-80~ 100 ° C). The built-in magnetic Stir system generates a swirl/spin magnetic field, which drives the corrosion-resistant magnetic Stir placed in the sample container to synchronize the swirl/spin. Stir the sample to ensure uniform temperature. Its external circulation function pumps the thermostatic liquid out, providing a thermostatic environment for external equipment.
Applications
Chemical synthesis, materials research, biopharmaceuticals, Petrochemicals, food testing, environment monitoring, teaching experiments
Standards
The information does not mention
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Add an appropriate amount of heat conducting medium through the Thermostatic bath drain valve.
3. Place the container with the sample and the Magnetic Stir into the tank.
4. Turn on the power and set the target temperature, Stir speed and other parameters through the LCD screen.
5. Start the cooling and magnetic Stir functions, and the equipment starts to work.
6. After the experiment, turn off the power of the equipment, and open the drain valve if you need to empty the medium.
Notice
• Before use, make sure that the equipment is well grounded and the Power supply voltage meets the requirements.
• The liquid level of the heat conducting medium in the tank should be within a reasonable range to avoid dry burning or overflow.
Do not move or tilt the device while it is running.
• Pay attention to the over-temperature alarm prompt and deal with abnormal situations in time.
• Regularly clean the surface and groove of the equipment to keep the ventilated port open.
• When making external circulation connections, ensure that the pipeline connections are firm and leak-free.
• If not in use for a long time, empty the tank and store it properly.
