Overview
PINGXUAN YHJD-60-2L Magnetic Stir Low Temperature Thermostatic Bath is an experimental equipment that integrates low temperature thermostatic, high temperature thermostatic and magnetic Stir functions. Its Temperature range can reach -60~ 100 ℃, and it has domestic circulation function, which realizes multi-purpose of one machine. It is suitable for experimental scenes that require precise temperature control and sample Stir.
Features
Unique design of magnetic Stir system, Stir speed 0~ 1500rpm stepless adjustable, can be directly on the sample Stir, without external Stirrer, easy to use and safe.
2. The corrosion-resistant strong magnetic Stir can be synchronized with the magnetic Stir system to keep the sample temperature uniform for a long time and improve the experimental accuracy.
3. Equipped with large screen LCD display, Temperature Stability, easy to operate.
4. With over-temperature alarm function, it can automatically cut off the load to ensure safety.
5. Support temperature measurement deviation correction, temperature accuracy up to 0.1 ℃.
6. It uses an effective fully enclosed Compressor for cooling, with fast cooling speed, low noise, and multiple protections for overheating and overcurrent.
7. With external circulation function, it expands the application range of the instrument.
Principle
The device achieves rapid cooling through a fully enclosed Compressor refrigeration system. The built-in magnetic Stir system generates a swirl/spin magnetic field, which drives the corrosion-resistant magnetic Stir placed in the reaction vessel (such as a three-mouth reaction bottle or an open flask) to synchronize the swirl/spin, thereby Stir the sample. With a precise temperature control system, the sample to be Stir is kept in a set low or high temperature thermostatic state for a long time to ensure uniform temperature.
Applications
Chemical synthesis, materials science, biopharmaceuticals, Petrochemicals, food testing, environment monitoring, teaching and research and other fields that require precise temperature control and sample mixing.
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Turn on the power switch of the device and set the required temperature through the LCD screen.
3. According to the experimental requirements, the flask or reaction bottle containing the sample and the magnetic Stir is placed in the Thermostatic bath.
4. Set and start the magnetic Stir through the control panel and adjust it to the desired speed.
5. Start the cooling or heating function and the equipment starts working.
6. After the experiment, turn off the Stir, temperature control functions, and finally turn off the power.
7. If you need to drain the liquid in the tank, you can use the drain valve equipped with the equipment.
Notice
* Please use the equipment in a smooth, well-ventilated environment.
* Power supply voltage meets equipment requirements before use.
Do not exceed the maximum capacity of the liquid in the tank, and use compatible media.
During operation, do not block the inlet and outlet to ensure smooth circulation.
The equipment has an over-temperature protection function. If an alarm is triggered, please check and troubleshoot it in time.
Before cleaning the equipment, be sure to disconnect the power supply.
Non-professional personnel should not disassemble or repair the internal structure of the equipment.
