Overview
PINGXUAN YHJD-80-2L Magnetic Stir Low Temperature Thermostatic bath is an experimental equipment that integrates low temperature thermostatic, high temperature thermostatic and magnetic Stir functions. Its Temperature range can reach -80~ 100 ℃, and it has domestic circulation function, which realizes multi-purpose of one machine. It is suitable for various experimental scenarios that require precise temperature control and Stir.
Features
1. Integrated magnetic Stir system, Stir speed 0~ 1500rpm stepless adjustable, no need for external Stirrer, easy to use and safe.
2. The corrosion-resistant strong magnetic Stir can be used to synchronize swirl/spin in the reaction bottle to maintain the uniform temperature of the sample for a long time and improve the experimental accuracy.
3. Equipped with large screen LCD display, Temperature Stability, easy to operate.
4. With over-temperature alarm function, it can automatically cut off the load to ensure safety.
5. Support temperature measurement deviation correction, temperature accuracy up to 0.1 ℃.
6. Adopt an effective fully enclosed Compressor for cooling, with fast cooling speed, low noise, and multiple protections for overheating and overcurrent.
7. Provide external circulation function to expand the application range of the device.
Principle
The device achieves rapid cooling through a fully enclosed Compressor refrigeration system. The built-in magnetic Stir system generates a swirl/spin magnetic field, which drives the corrosion-resistant magnetic Stir placed in the sample container to swirl/spin synchronously, thus Stir the sample. With the High Accuracy temperature control system, the medium temperature in the tank is precisely maintained at the set value, and the temperature is ensured to be uniform through the circulation system. When the temperature exceeds the safe range, the over-temperature protection system automatically alarms and cuts off the load.
Applications
Chemical Synthesis, Materials Science, Biopharmaceuticals, Food Testing, Petrochemicals
Standards
The information does not mention
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Add an appropriate amount of heat transfer medium to the tank through the drain valve.
3. Place the container with the sample and the Magnetic Stir into the tank.
4. Turn on the power switch and set the target temperature and Stir speed through the LCD screen.
5. Start the refrigeration and Stir function, and the equipment starts to work.
6. After the experiment, turn off the power of the device and remove the sample.
7. If you need to empty the medium, open the drain valve.
Notice
• Please use the equipment in a smooth, well-ventilated environment.
• Before use, make sure that a sufficient amount of suitable heat transfer medium has been added to the tank.
• Please select the appropriate Magnetic Stir according to the size of the container.
• When the equipment is running, do not block the inlet and outlet pipes and ventilators.
• Pay attention to the over-temperature alarm prompt, if there is any abnormality, please deal with it in time.
• When emptying or replacing the medium, please use the drain valve equipped with the equipment.
Before cleaning the equipment, be sure to disconnect the power supply.
