Overview
The PINGXUAN DK-10SK three-hole three-temperature Thermostatic bath is equipped with three sets of independent sinks and corresponding temperature control devices, which can set, control and display different temperatures for three sets of sinks at the same time. It is suitable for a variety of thermostatic tests and auxiliary heating. The product is widely used in scenes such as drying, condensing, distillation, impregnation of chemical reagents and biological products, thermostatic fostering and equipment disinfection.
Features
1. The three sets of independent thermostats are all microcomputer intelligent temperature control, with PID self-tuning, dual LED digital display and menu-type parameter setting functions.
2. Equipped with an independent temperature limit alarm system, over-temperature automatic alarm and power-off protection to ensure experimental safety.
3. With 0-9999 minutes time setting function, accurate temperature control, easy operation, and intuitive display.
4. The working water tank adopts stainless steel plate argon arc welding, the shell is Cold rolled steel plate and electrostatic spray treatment, beautiful and durable.
Principle
The device uses three independent microcomputer intelligent temperature control systems to set and adjust the temperature of three independent water tanks to achieve accurate thermostatic of the liquid in their respective tanks. When the temperature exceeds the set limit, the independent alarm system will start and cut off the power to ensure safety.
Applications
Drying, condensing, distillation, impregnation, chemical and biological treatment, thermostatic fostering, equipment boiling and disinfection
Steps
1. Turn on the power supply (220V/50HZ).
2. Set the required temperature and thermostatic time (0-9999 minutes) through the microcomputer thermostat corresponding to each slot.
3. Add an appropriate amount of liquid medium to each sink.
4. Start the device, the temperature control system starts to work, and the LED screen displays the real-time temperature.
5. After the experiment is over or the set time is reached, turn off the power.
Notice
* Power supply voltage meets equipment requirements (220V/50HZ).
When operating, please pay attention to the independent temperature setting of each sink to avoid confusion.
* Do not exceed the rated power of the device (1000W) and the maximum Temperature range (100 ℃).
* When the alarm system starts-up, it should immediately check and eliminate abnormal conditions such as overheating.
* Keep the equipment and work area clean and drying to avoid liquid entering the electrical part.
* The shell of the equipment is electrostatic spraying, please use a soft cloth when cleaning to avoid scratches.
