Overview
HY-1 constant pressure powder sampling box is a special powder constant pressure sampling device of ZHIBANG brand, which is widely used in kaolin, calcium carbonate, talc, barite, Titanium Dioxide, activated clay, barium sulfate, oxidation mg, flour, cement, pigment and other powder materials and slurry constant pressure sampling.
Features
1. It is composed of two parts: a powder pressing device and a powder pressing device, with a clear structure.
2. The powder pressing device can provide a relatively constant force, and the torque is converted into a downward constant pressure output by pulling the handle.
3. The powder press is used as a sample container and compaction tool, and is equipped with a sample holder and interface.
4. Easy to operate, the handle can be pulled to compact the powder or slurry, and the handle slips when the set degree of compaction is reached to ensure that the tightness of each sample is relatively uniform, thereby improving the accuracy and Stability of the test.
Principle
The sampling box converts the torque generated by the handle through the powder pressing device into a constant pressure that advances downward through the internal mechanism. This pressure is applied to the powdery material or slurry contained in the powder press to make it compacted to form a sample body with a uniform density.
Applications
Constant pressure sampling of kaolin, calcium carbonate, talc, barite, Titanium Dioxide, activated clay, barium sulfate, oxidation mg, flour, cement, pigment and other powder materials and slurries.
Standards
GB 9087-1988、GB/T 5950-2008、GB 11942-1989、GB/T 8940.2-2002、GB 12097-1989、FZ/T 50010.7-1998、GB/T 13025.2-1991
Steps
1. Put the powder or slurry sample to be tested into the powder press.
2. Connect the powder pressing device to the powder pressing device interface.
3. Pull the handle of the constant pressure Sampler to apply pressure to the sample for compaction.
4. When the handle begins to slip, it indicates that the set degree of compaction has been reached, and the sample is prepared.
Notice
• Please ensure that all parts of the equipment are clean and in good condition before use.
• Please turn the handle evenly and smoothly when operating.
• Do not use beyond the scope or for non-specified materials.
• Please clean up in time after use and keep the equipment drying.
