Overview
Vertical Load Pressure Tester (Plastic Bottle Top Pressure Tester) Model HP-ZYY02, suitable for beverage bottles, PET bottles, pure water bottles, oil bottles, cans and other Encasement containers for vertical load strength, top pressure strength, bottle body pressure and other performance tests. The instrument is widely used in food, medicine, daily necessities and other industries. It is an essential test equipment for Quality inspection organizations, beverage factories and packaging material manufacturers to evaluate Encasement's ability to withstand upper pressure when stacking.
Features
1. Using microcomputer processing system and PVC control panel, Degree of automation is high, data collection is fast, with intelligent judgment function, the test process is automatically completed.
2. With data processing function, the statistical results of various data can be directly obtained.
3. Equipped with intelligent configuration such as limit travel protection and overload protection to ensure safe operation, and built-in micro printer to facilitate data output.
4. Real-time display of pressure resistance and other information during the test.
5. High Accuracy Motor Control, Accurate Positioning, Fast Response, Low Noise, Effectively Improve Test Efficiency.
Principle
The sample is installed between the two collets of the fixture to drive the two collets to make relative movement. Through the force value Sensor located on the moving collet and the built-in displacement Sensor of the machine, the force value change and displacement change data during the test process are collected in real time, and the performance indicators such as the compressive strength of the sample are calculated accordingly.
Applications
Food, medicine, daily necessities and other industries, Quality inspection organizations, beverage factories, packaging material manufacturers
Standards
GB/T 17200、QB/T 1868、GB/T10440、QB 2357、QB/T 2665、BB/T 0044
Steps
1. Install the specimen (e.g. a plastic bottle) between the two clamps of the instrument.
2. Set test parameters (e.g. speed) through the control panel.
3. Start the test, the two chucks move relative to each other, and the instrument automatically performs a compression test.
4. During the test, the system collects force and displacement data in real time.
5. After the test is completed, the microcomputer system automatically processes the data and generates statistical results.
6. Test reports can be printed through the built-in microprinter.
Notice
• Before operation, make sure that the instrument is well grounded. Power supply voltage is 220V.
Do not exceed the maximum test force of the instrument (5KN).
When installing the specimen, ensure that it is firmly located in the center of the fixture to prevent inaccurate test data or damage to the instrument.
During the test, do not touch moving parts.
The instrument has an overload protection function, but it is still necessary to pay attention to safety during operation.
• Regularly maintain and calibrate the instrument to ensure test accuracy.
