Please contact customer service
The pneumatic clamping structure is equipped with a foot switch, which is convenient to operate and reduces errors; the accuracy can reach 0.01N within the range of 0-30N; it is equipped with a 7.0-inch color touch screen to display data and tensile curves in real time, and supports a variety of paraMeter measurement and data statistics.
Category : Tensile Testing Machine
Brand : ZhiBang
SKU : NB033090
Service :The delivery and service By NBCLab.Com
Pneumatic Vertical Computer Tension Instrument (ZB-QL300) is an instrument specially designed for high-sensitivity and weak physical signal performance detection of Non-metallic materials such as paper and towels. The instrument adopts a vertical single-column structure, is equipped with a pneumatic clamping device and a foot switch, which is easy to operate, the sample is flat, and can effectively reduce human error. The instrument adopts a high-speed microprocessor and a 7.0-inch color touch LCD screen, which can display data and tensile curves in real time. Users can design experimental functions according to their needs.
1. Adopt imported motors for low noise and accurate control. 2. Adopt pneumatic blessing structure, equipped with foot switch, easy to operate and reduce operation error. 3. Adopt large-screen color touch LCD display, which can display various data and tensile curves in real time. 4. Measurement range of 0-30N, accuracy up to 0.01N, resolution 0.01N, professional for the measurement of paper parameters. 5. Direct measurement results: After completing a set of tests, it is convenient to directly display measurement results and print statistical reports, including average value, standard deviation and coefficient of variation. 6. Variable sample size and tensile speed: For commonly used standard size samples, the tensile test can be carried out directly at the specified speed, and the appropriate tensile speed can be set as needed to change the test length and width of the sample. 7. Degree of automation: Instrument design uses professional devices at home and abroad, single-chip microcomputer for information sensing, data processing and action control, with automatic reset, data memory, overload protection. 8. Data communication: The instrument is equipped with a standard serial RS232 interface, which can provide data communication for the host computer comprehensive reporting system. 9. Measurement range: Measurement range can be changed according to user needs to configure different dynamometers, which can be widely used in tensile testing of various papers and materials. 10. Multifunctional, flexible configuration: The instrument is mainly used for paper measurement, and changing the configuration of the instrument can be widely applied to the measurement of other materials.
The instrument uses a pneumatic clamping structure to hold the sample and is driven by a motor to stretch. During the stretching process, the high-speed microprocessor chip collects and processes the force value and displacement signal in real time, and displays the data and tensile curve on the touch screen in real time. When the sample is broken, various mechanical properties parameters are automatically calculated and displayed. After completing a set of tests, the data can be statistically processed.
Paper tension, tensile strength, elongation, fracture length, tensile energy absorption and other performance measurement, food bag heat sealing strength, tensile strength, Peel Strength measurement, towel adhesive strength, edge strength, tensile strength, elongation measurement, Pressure sensitive adhesive Peel Strength, tensile strength measurement, synthetic fiber filament breaking strength, elongation measurement, zipper slip measurement
ISO 1924 "Determination of tensile strength of paper and Cardboard", GB/T 12914 "Determination of tensile strength of paper and Cardboard", GB/T 24328.3 "Paper and its products, Part 3: Determination of tensile strength, elongation at break and tensile energy absorption", GB/T 24328.4 "Paper and its products, Part 4: Determination of wet tensile strength"
1. Turn on the power supply (AC220V +/- 10% 50HZ) and turn on the instrument. 2. According to the sample type and test requirements, install or select the appropriate fixture. 3. Adjust the collet spacing to the desired sample size within the range of 0-200mm. 4. Set test parameters, such as tensile speed (adjustable from 1 to 399 mm/min), via the touchscreen. 5. Place the specimen evenly into the pneumatic fixture. 6. Use the foot switch to control the pneumatic clamp to clamp the specimen. 7. Start the test, the instrument automatically stretches, and the screen displays data and Linear dispersion in real time. 8. After the sample is broken, the instrument automatically stops and displays the test results (such as tension resistance, elongation, etc.). 9. After the test of a group of samples is completed, the statistical data (average value, standard deviation, etc.) can be viewed and printed by pressing the button. 10. After the test, turn off the power of the instrument.
* Power supply voltage AC220V +/- 10% 50HZ meets instrument requirements. The air source pressure should be maintained within the range of 0.2MPa to 0.4MPa to ensure a stable clamping force. Before operation, please check whether the fixture is firmly installed and whether the sample is placed flat. When setting the tensile speed, it is necessary to choose the sample material and test standards reasonably. When the instrument is running, do not put your hands or Miscellaneous items into the moving parts area. Measurement accuracy (indication Precision +/- 1%) is regularly maintained and calibrated. * Net weight of the instrument 55kg, when moving or installing, pay attention to safety and prevent dumping. * To connect to the host computer, please use the standard RS232 interface for data communication.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
