Overview
YN-200 microcomputer compressire strength tester is a professional equipment for compressive strength testing of carton Encasement parts. It is suitable for compressive test, constant pressure test, stacking test, compression displacement test and deformation test of high-strength Encasement parts such as corrugated boxes and honeycomb boxes. It can also be used for compression test of plastic drums and other material container. During the test, it is necessary to ensure that the carton and the pressing plate are accurately parallel to ensure the smoothness and repeatability of the results.
Features
1. Equipped with a 7-inch Touchscreen, it supports a bilingual Chinese and English language system, and visually displays anti-stress information in real time.
2. Power and time can be set directly. After the test is completed, it will automatically reset and automatically record the compression results and compression deformation.
3. Adopt open structure design, double ball screw and double guide column, good parallelism, strong Stability, good rigidity, long service life.
4. With intelligent configuration such as extreme travel protection and overload protection, and built-in power protection device to ensure operation safety and equipment stability.
5. The instrument is equipped with a high-speed micro-printer, which can print data such as test time, number, maximum crushing force, and compression displacement.
6. Can be equipped with computer-specific analysis software, Linear dispersion detail analysis, and generate programmable file management analysis report (optional).
Principle
The instrument applies pressure to the sample by driving the platen through the microcomputer Control system, and loads according to the set test mode (such as fixed value test, compression test, stacking test or compression displacement test). During the test process, the Sensor monitors the force value and displacement in real time, and the data is processed and displayed by the system. Finally, the sample compressire strength, pressure holding capacity, stacking performance or compression deformation are measured.
Applications
Corrugated cartons, honeycomb cartons, single-layer Cardboard boxes, strength testing of heavy-duty cartons, paper products, paper corner protectors, paper barrels, cartons, paper cans, wooden box export wooden boxes, sliding wooden boxes, hoarding boxes, plywood boxes Strength testing of plastic Encasement barrels, strength testing of container barrels, compression testing of other fiberboard containers
Standards
GB/T 4857.4、GB/T 4857.3、ISO 12408、ISO 2234、QB/T 1048、ASTM D642、ASTM D4169、TAPPI T804
Steps
1. Select the appropriate equipment specifications according to the carton Dimensions.
2. Place the specimen (e.g. a carton) between the platens to ensure that it is accurately parallel to the platen.
3. Select the test mode (such as pressure test, stacking test, etc.) through Touchscreen and set relevant parameters (force, time, etc.).
4. Start the test, and the instrument automatically pressurizes and displays data in real time.
5. After the test is completed, the instrument is automatically reset, recorded, and the results can be output through the printer.
6. For further analysis, the data can be processed through optional computer software.
Notice
Before testing, ensure that the carton is accurately parallel to the platen to ensure the accuracy of the test results.
Equipment specifications should be selected according to the size of the carton Dimensions.
• Environmental requirements: Temperature (20 +/- 10 ℃), Humidity < 85%.
• Power supply voltage is 220V/50Hz before use.
• Please pay attention to the safety devices of the equipment when operating, such as Travel protection, power protection and emergency stop switch.
• The instrument is equipped with a built-in power protection device, but it is still necessary to avoid using it in an environment where the power supply magnetic field is too large or unstable.
