Overview
JW500-02 semi-automatic sheet reader is a pulp forming equipment used in the laboratory. It can Stir the pulp of plants, minerals and other fibers after cooking, beating, sieving and standard dredging in the sheet copying cylinder and form quickly suctionfiltration, and then press to form a round sheet with a diameter of 200mm for subsequent physical testing.
Features
1. Fully automatic noiseless copying, small size, easy to move, overcomes the noise pollution of the traditional bubble slurry air press, works silently, has good continuity, and has high papermaking accuracy.
The diameter of the papermaking is about 200mm, and it is equipped with a stainless steel circulating water tank.
3. Two different types of automatic water supply can be selected at will.
4. Equipped with white water circulation function.
5. Adopt solenoid valve to automatically drain water.
6. Equipped with a miniature pump for self-priming.
7. Equipped with vacuum papermaking function.
Principle
Stir the pulp into a sheet-copying cartridge, then press it on the equipment to form a circular experimental paper sheet of the specified size.
Applications
Laboratory pulp sheet preparation, paper physical performance testing sample production
Standards
QB/T3703-1999、ISO 5269/2、ISO 5269/3、NBR 14380/99、TAPPI T-205、DIN 54358、ZM V/8/76
Steps
1. Put the pulp after cooking, beating, sieving and standard dredging into the sheet copy barrel.
2. Stir the pulp in the barrel.
3. Start the equipment for rapid suctionfiltration molding.
4. Press the formed wet sheet on the equipment.
5. Obtain a sample of a circular sheet with a diameter of 200mm.
Notice
• Before operating the equipment, ensure that the pulp has completed the standard dredging.
• Note that the power of the device is 463W, and it needs to be matched with the corresponding power supply.
Equipment volume is 500 × 600 × 1300mm, weight 80KG, need to pay attention to safety when moving.
• Operate in accordance with relevant technical standards during use.