Please contact customer service
Pump suction sampling, Response fast, sampling distance greater than 10 Meters. With IP65 Protection Rating, waterproof splash dust, built-in Filter. Supports simultaneous detection of 1-4 gases, standard 100,000 large-capacity data storage.
Category : Gas Detector
Brand : GaoPin
SKU : NB033429
Service :The delivery and service By NBCLab.Com
NGP40-CO portable multi-function carbon monoxide detection and alarm instrument is a portable instrument for rapid detection of gas concentration, temperature and humidity measurement and excessive alarm. It uses 2.4 inch high definition color screen, selected well-known brand Sensor, detection principles include electrochemistry, infrared, catalytic combustion, thermal conductivity, PID photoions, etc., can detect gas concentration or leakage in pipelines, confined spaces, atmospheric environments, and high concentration single gas purity, detecting more than 1000 kinds of gas.
1. Waterproof splash, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference, protection level IP65, built-in water vapor and dust Filter. 2. Built-in pump suction measurement, Response is fast, sampling distance is greater than 10 meters, special gas path design can directly detect negative pressure or positive pressure -0.5~ 2 kg of gas. 3.2.4-Inch high definition color screen displays real-time concentration, alarm, time, storage, communication, power, charging status and other information, and the menu adopts high definition simulation icons. 4. Large-capacity data storage, standard 100,000, support real-time, timed or only stored alarm data, can be viewed locally, deleted or uploaded through USB computer analysis. 5. USB charging interface, compatible with computer, power bank, mobile phone charger, with overcharge, overdischarge, overvoltage, short circuit, overheating protection, 5-level power display, support USB hot swap, can work during charging. 4500 mA large capacity rechargeable polymer battery can work continuously for a long time. 7. Sound and light, vibration, vision, under-voltage, fault and other multi-directional three-dimensional alarms, alarm values can be set, and alarm methods can be selected. 8. High Accuracy temperature and humidity measurement (optional), temperature compensation for Sensor, Temperature range -40~ 60 degrees, can detect 400 degrees of gas (higher temperature can be customized optional). 9. All-in-one detector with 1-4 gas Sensors at the same time. 10. Three display modes can be switched: simultaneously display four gas concentrations, large font cyclic display single channel concentration, real-time Linear dispersion. 11. The Chinese and English interface is optional, the default is Chinese, and there are concise operation prompts. 12. Data recovery function, you can choose to restore or restore all. 13. Zero automatic tracking, long-term use is not affected by zero drift. 14. The target point is calibrated three levels to ensure measurement Linearity and accuracy, in line with national standards and local Measurement Bureau standards. 15. Automatic identification and prevention of concentration calibrating errors. 16. Supports real-time or timed detection, and the pump can be turned off to extend the startup time. 17. Can record calibrating, maintenance, fault log, Sensor life expiration reminder, next calibrating time reminder.
The instrument adopts the gas Sensor of electrochemistry, infrared, catalytic combustion, thermal conductivity, PID light ion and other principles for detection. Through the built-in pump suction sampling, the special gas circuit design can adapt to the positive and negative pressure environment, the gas suction detection unit, the Sensor converts the gas concentration signal into an electrical signal, which is processed by professional circuit design and kernel algorithm, and finally displays the concentration value on the screen and alarms according to the settings.
Chemical, Petroleum, Environmental Protection Flue Gas Analysis, Pipeline, Boiler Gas Analysis, Air Treatment and other occasions that need to detect gas concentration
Exia II CT4 Ga、IP65
1. Power on: Press the power button to start the instrument. 2. Detection: The instrument automatically pumps sampling and displays real-time concentration, and can switch the display mode by pressing the button (multi-gas simultaneous display, single gas circulation, real-time Linear dispersion). 3. Settings: Enter the setting interface through the menu key, and you can perform language selection, alarm value setting, alarm mode selection, storage mode setting (real-time/timing/alarm only), calibrate and other operations. 4. Data management: You can view or delete stored historical data locally, or connect to a computer through a USB interface, and use supporting software to export and analyze data. 5. Charging: Connect the charger, computer or power bank through the USB interface for charging, and the instrument can be used normally during charging. 6. Maintenance: Sensor calibrated or replaced according to the instrument reminder, regularly check and replace the Humidity Dust Filter.
• This instrument is an intrinsically safe explosion-proof equipment with the explosion-proof mark Exia II CT4 Ga. Please use it in the specified dangerous place. • Protection Rating is IP65, which can be dustproof and splash-proof, but non-diving equipment, do not immerse in liquids. • The operating environment temperature is -40 ℃~ + 60 ℃, and the sample gas Temperature range is -40 ℃~ + 70 ℃. When detecting higher temperature gases, high temperature sampling cooling and infiltrating handle or high temperature and humidity pretreatment system need to be selected. • The instrument has a built-in Filter, which is suitable for high humidity or high dust environment, but it is necessary to check and replace the Filter regularly to ensure performance. • When calibrating, please use standard gas and follow the operating instructions. The instrument has the function of misoperation identification and prevention. The alarm value should be set reasonably according to the on-site safety requirements, and be familiar with various alarm methods such as sound, light, vibration, and vision. • The data storage function is turned off by default. If you want to use it, you need to turn it on in the settings, and you can set the storage time interval. • The battery has protection functions such as overcharge and overdischarge, please use a matching or compatible USB charging device. • When not detected for a long time, the sampling pump can be turned off to save power and prolong standby time. Do not disassemble or modify the instrument without authorization. Repairs should be carried out by professionals. • Pay attention to the life of the Sensor (2-3 years), and pay attention to the life expiration reminder and calibrated time reminder of the instrument in time.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
