Please contact customer service
Pump suction sampling, Response is fast, sampling distance is greater than 10 Meters. Built-in 4500mAh large-capacity battery, support long-term continuous work. With IP65 Protection Rating, waterproof and dustproof, adapt to harsh environments.
Category : Gas Detector
Brand : GaoPin
SKU : NB033430
Service :The delivery and service By NBCLab.Com
NGP40-CH2O portable multi-function formaldehyde detection and alarm instrument is a portable device for rapid detection of various gas concentrations, temperature and humidity measurement and realization of excessive alarm. The instrument uses 2.4 inch high definition color screen to display data in real time, selects well-known brand Sensor, based on electrochemistry, infrared, catalytic combustion, thermal conductivity, PID photoion and other detection principles, can detect more than 1000 kinds of gases, suitable for gas concentration detection in pipelines, confined spaces, atmospheric environments, as well as gas leakage or high purity single gas detection.
1. Waterproof splash, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference, protection level IP65, built-in water vapor and dust Filter. 2. Built-in pump suction measurement, Response is fast, sampling distance is greater than 10 meters, special gas path design can directly detect negative pressure or positive pressure -0.5~ 2 kg of gas. 3.2.4 inch high definition color screen display real-time concentration, alarm, time, storage, communication, power, charging status and other information. 4. Large capacity data storage function, standard 100,000 data storage capacity, support real-time, timing or only store alarm data, can upload computer analysis through USB interface. 5. USB charging interface, compatible with computer, power bank, mobile phone charger, with overcharge, overdischarge, overvoltage, short circuit, overheating protection, 5-level accurate power display, support USB hot swap, charging can work normally. 4500 mA large capacity rechargeable polymer battery can work continuously for a long time. 7. Equipped with multi-directional three-dimensional alarm functions such as sound and light, vibration, vision, under-voltage, failure, fall, etc., the alarm value and mode can be set. 8. High Accuracy temperature and humidity measurement (optional), and temperature compensation for Sensor, using Temperature range -40~ 70 degrees, can detect 400 degree gas (higher temperature can be customized optional). 9. It can detect 1 to 4 gases simultaneously, and the three display modes can be switched. 10. Chinese and English interface is optional, with data recovery, zero point automatic tracking, target point three-level calibrating, concentration calibrating misoperation automatic identification, real-time or timing detection, calibrating log recording, Sensor life expiration reminder and other functions.
The instrument uses electrochemistry, infrared, catalytic combustion, thermal conductivity, PID light ion and other principles of gas Sensor for detection. Through the built-in pump suction Sampling method, the gas to be measured is sucked into the instrument, and the Sensor generates corresponding electrical signals according to the gas concentration. After professional circuit design and mature kernel algorithm processing, the gas concentration value is finally displayed on the 2.4-inch high definition color screen in real time, and an alarm is triggered when the concentration exceeds the standard.
Chemical, Petroleum, Environmental Protection Flue Gas Analysis, Pipeline, Boiler Gas Analysis, Air Treatment and other occasions that need to detect gas concentration
Exia II CT4 Ga
1. Power on: Long press the power button to start the instrument. 2. Mode selection: Select the detection mode (real-time detection, timing detection, etc.) through the menu key. 3. Gas detection: The sampling probe is placed in the environment to be tested or connected to the sampling tube, and the instrument automatically pumps the sampling and displays the concentration. 4. Data view: View real-time data, historical Linear dispersion or stored data through the menu. 5. Alarm settings: Enter the settings menu and set the alarm value and alarm mode as required. 6. Data export: Connect to the computer through a USB data cable, and use the host computer software to export and store data. 7. Charging: Charge the instrument with a standard USB charger or compatible device.
● The instrument is intrinsically safe explosion-proof equipment with the explosion-proof mark Exia II CT4 Ga. Please use it in the specified dangerous place. ● Protection Rating is IP65, can be dustproof, waterproof splash, but non-diving equipment, do not immerse in water. ● The built-in Filter needs to be checked and replaced regularly to prevent high humidity or high dust environment from damaging the Sensor. ● Before selecting a high temperature sampling handle or pretreatment system, please confirm whether the gas temperature to be measured exceeds the default range of the instrument (-40 ° C~ + 60 ° C). ● When calibrating, please use standard gas and pay attention to the automatic blocking function of the instrument for calibrating misoperation. Avoid strong vibration or impact on the instrument to prevent damage to internal components. ● Please use the original or compatible charging device when charging, and ensure the safe charging environment. When not in use for a long time, it is recommended to charge it regularly to maintain battery activity. ● Sensor life is generally 2-3 years, please contact the replacement in time to ensure the detection accuracy.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
