Overview
The adjustable distance paper cutter (model: PY-H605) is a special sampling tool launched by PUYUN, which is mainly used to cut standard samples of sheet materials with film thickness less than 5mm, such as paper, special paper, film, non-woven fabrics, fiberglass cloth, Spinning & weaving products, plastic sheets, etc. The product not only has the ability to cut ultra-thick materials, but also has the standard distance adjustment function, which can quickly and accurately cut standard area samples. It is suitable for sample preparation for various physical performance tests such as material weight, tensile strength, stiffness, interlayer bonding, Tear strength, folding resistance test, etc.
Features
1. Strong cutting ability: Film thickness less than 5mm can be cut a variety of sheet materials, including paper, film, non-woven fabrics, plastic sheets, etc.
2. Precise distance adjustment: with standard distance adjustment ability to ensure accurate sampling size.
3. High Accuracy Cutting: The parallelism of the incision is less than or equal to 0.1mm, and the parallel accuracy is 0.1 +/- 0.01mm to ensure the standard of the sample.
4. Durable blade: The blade has high Hardness and can be used for cutting steel sheets, which is durable.
5. Stable structure: Linear guides are used for parallel positioning to ensure a stable and accurate cutting process.
6. Humanized design: equipped with a triangular inclined surface ruler, reverse reading, easy to observe and operate; the paper feeding height is 6mm, which is convenient for material feeding.
7. High-quality material: The sampling table panel is made of 304 stainless steel, which is durable and easy to clean.
Principle
The paper cutter cuts the material placed on the panel of the 304 stainless steel sampling table through the relative movement of the upper and lower two sets of high-Hardness blades (the upper blade thickness is 7.5mm, and the lower blade thickness is 11mm). During operation, the material is fed through the paper feed height of 6mm, and the linear guide rail is used to ensure the parallel and stable cutting path. Combined with the triangular inclined surface ruler, precise distance adjustment is carried out, and finally the standard sample cutting with high parallelism (≤ 0.1mm) is realized.
Applications
Paper testing, special paper testing, film testing, non-woven fabric testing, fiberglass fabric testing, Spinning & weaving product testing, plastic sheet testing, material physical performance testing (such as gram weight, tensile strength, stiffness, interlayer bonding, Tearing strength, folding test) Standard sample preparation
Standards
The data did not mention specific compliance criteria.
Steps
1. According to the required sample size, adjust the cutting distance through the triangular inclined surface ruler.
2. Place the material to be cut (Film thickness less than 5mm) flat on the 304 stainless steel sampling table panel.
3. Utilize a 6mm paper feed height to feed the material front into the cutting area.
4. Press down the handle smoothly and drive the blade to complete the cutting action along the linear guide rail.
5. Remove the cut standard sample for subsequent testing.
Notice
* Please ensure that the film thickness of the cutting material is less than 5mm, exceeding the range may affect the cutting effect or damage the blade.
When operating, it is necessary to apply force smoothly to avoid material displacement or uneven cutting.
* Keep the blade and sampling table panel clean and maintain regularly to ensure cutting accuracy.
* Hardness of the blade, please pay attention to safety during operation to avoid scratches.
Do not use this equipment to cut hard materials outside the specified range to prevent damage to the equipment.
