Overview
CHNSPEC TH-09 haze meter is a professional instrument for haze and light transmitance measurement, which can easily realize ASTM standard haze measurement (ASTM D1003/D1044) and light transmitance measurement. The instrument has an open measurement area and supports both vertical and horizontal Test methods. It is widely used in transmittance and haze detection in Glass Processing, Plastic Processing, Film, Display Processing, Encasement Industry and other industries.
Features
1. Meet the test standards: GB/T 2410, ASTM D1003/D1044, with third-party verification report
2. The instrument does not need to be preheated, it is measured immediately, and the result is available in 1.5 seconds
3. Meet CIE-A, CIE-C, CIE-D65 three standard Illuminant haze and total transmittance measurement
4.21Mm measurement diameter
5. Have an open measurement area, which can meet the measurement of any size sample
6. With vertical measurement and horizontal measurement two measurement states, suitable for sheet, film, liquid and other sample measurement
7. LED Illuminant, Long Life, No Replacement for 10 Years
Principle
The haze meter adopts a transmission optical path structure, is designed for 0/D (parallel light illumination, diffuse reflection reception), uses 400~ 700nm full Light spectrum LED Illuminant illumination, and performs optical signal acquisition and processing through the integrating sphere to achieve accurate measurement of sample haze and transmittance.
Applications
Glass Processing, Plastic Processing, Film, Display Processing, Encasement Industry
Standards
ASTM D1003/D1044、ISO13468/ISO14782、GB/T 2410、JJF 1303-2011、CIE 15.2、GB/T 3978、ASTM E308、JIS K7105、JIS K7361、JIS K7136
Steps
1. Connect the power supply and turn it on.
2. Measurement mode (vertical or horizontal)
3. Place the sample in the measurement area
4. Start the measurement and read the result after 1.5 seconds
5. Save or export measurement data
Notice
• Operating temperature range is + 10 ° C to 40 ° C (+ 50 ° F to 104 ° F)
• Storage Temperature range 0 ° C to 50 ° C (+ 32 ° F to 122 ° F)
• Power supply with DC12V power supply
• Make sure the sample is clean and free of contamination before measurement
• Avoid use in a strong light environment
