Overview
The YMG60S 60 ° Miniature Glossiness Meter is a portable measuring instrument designed with a smaller bottom contact area for easy measurement of convex curved surfaces and small area objects. It is suitable for gloss measurement and mass inspection in paints inks, coatings, plastic electronics, furniture, Pottery and porcelain, Eletroplating, Hardware and other industries.
Features
1. Smaller contact area is convenient for measurement of convex curved surfaces and small-area objects;
2, can measure the traditional glossmeter can not be measured a certain concave object, such as the inside of the pipe and so on;
3, the control mode is more conducive to the ergonomic design of the measurement position control;
4. The display screen has a 10 ° tilt angle for easy viewing.
Principle
Based on the 60 ° standard Measurement Angles, the Glossiness Meter measures the ability of an object's surface to reflect light by emitting and receiving rays of light at specific angles, quantified in Gloss Units (GU). Its miniature design Optical inspection system allows for accurate measurements on smaller contact surfaces.
Applications
Paints inks, Coatings, Plastic Electronics, Furniture, Pottery and porcelain, Eletroplating, Hardware
Standards
Meet JJG 696 secondary glossmeter requirements
Steps
1. Turn it on;
2. Align the instrument measurement port and stick to the surface of the measured object;
3. Press the measurement button for measurement;
4. Read the measurement results on the display screen;
5, manually calibrate as required.
Notice
• Temperature range 0~ 40 ° C (32~ 104 ° F), storage temperature -20~ 50 ° C.
• The relative humidity should be less than 85% RH without condensation.
• Powered by 1 AA alkaline battery or NiMH rechargeable battery.
• When not in use for a long time, the instrument will automatically shut down after 180 seconds.
• Make sure the calibration plate is clean before measurement and manually calibrate as needed to ensure measurement accuracy.
