Overview
HUXI HR-400JBF round tube Disperser is a smart and convenient laboratory dispersion equipment. It uses variable frequency motors, which operate stably and have low noise, and can easily meet a variety of high-demand dispersion and stirring experiments.
Features
1. Select a variable-frequency motor for stable operation, low noise, long-term operation, and safe and reliable design.
2. The dispersion disc is made of good stainless steel with good corrosion resistance.
3. The dispersion disc adopts hexagonal screws to connect with the dispersion shaft, which is easy and flexible to disassemble and assemble.
4. Frequency conversion stepless speed regulation, brushless motor, maintenance-free, no spark, no dust, higher safety performance.
5. Adopt ordinary bracket, spring lifting structure.
Principle
The device controls the brushless motor through the frequency converter to realize stepless speed regulation, and drives the spindle and the stainless steel dispersion disc connected to it at high speed swirl/spin. During the swirl/spin process, the dispersion disc has strong shearing, Impact and turbulence on the material, so as to realize the rapid dispersion, mixing and homogenization of the material. The spring lifting mechanism is convenient to adjust the working position of the dispersion disc in the container.
Applications
Suitable for experimental fields that require high dispersion and stirring
Steps
Place the device on a stable bench and connect it to a 220V power supply.
2. According to the height of the container, adjust the height of the spindle through the spring lifting mechanism to make the dispersion disc in a suitable working position.
3. Use the hexagon tool to mount the appropriate dispersion disc to the spindle and fasten it.
4. Put the material to be processed into the container to ensure that the dispersion disc is immersed in the appropriate depth below the liquid level.
5. Start the device and gradually adjust from low speed to the required Rotation speed (0~ 8000rpm) through the speed control knob.
6. After the dispersion is completed, turn off the power after adjusting the Rotation speed to the lowest level.
7. Raise the dispersion disc for cleaning and maintenance.
Notice
• Make sure the Power supply voltage of the equipment is 220V and grounded reliably.
Processing capacity is 3L, and the viscosity of the material should not exceed 20000cp.
• Before starting, be sure to confirm that the dispersion disc is firmly installed and immersed below the liquid level to avoid dry rotation.
• Rotation speed should be slow and smooth to avoid sudden changes.
• Do not put your hands or Miscellaneous items near swirling/spinning parts while the equipment is running.
• After use, the dispersion disc and spindle should be cleaned in time to keep the equipment drying.
• When not in use for a long time, please disconnect the power supply.