Overview
The HT-S330 3D Shaker is a multi-functional device of the HUXI brand, suitable for applications such as Electrophoresis gel staining/decolorization, sample washing, molecular hybridization, settling, protein imprinting, cell fostering, etc. It can also be used for cell fostering and cell membrane transfer, and can be used in cryogenic and Thermal Chambers.
Features
1. The molded shell is acid and alkali resistant, non-deforming, and easy to clean;
2. With skirt power switch and timing, speed regulation and power socket jack, which can prevent corrosion and power short circuit of switch and speed regulation timing components when liquid leakage;
3. The whole machine adopts crane bearing swirl/spin design, firm, no abrasion, suitable for long-term use;
4. Ultra-small design, does not take up space, can be used in the refrigerator;
5. Three-dimensional tumbling, with an inclination angle of up to 10 °; maximum load of 5kg (including fixture); speed range of 10-70 rpm;
6. LCD screen, displaying time and speed respectively;
7. The motor is designed with a wide voltage.
8. A variety of pallets and fixtures are available.
Principle
The HT-S330 3D Shaker uses a motor to drive the crane bearing swirl/spin to achieve three-dimensional tumbling motion, with a tilt angle of up to 10 °, providing a uniform shaking effect, suitable for a variety of experimental applications.
Applications
Electrophoresis gel staining/decolorization, sample washing, molecular hybridization, settling, protein imprinting, cell fostering, cell membrane transfer
Steps
Connect the power supply to ensure that the voltage is within the range of 100-240V.
2. Select the appropriate pallets and fixtures as required.
3. Place the sample to ensure that the total load does not exceed 5kg.
4. Set the time and speed parameters through the LCD screen.
5. Start the device and start the shaking operation;
6. Turn off the power and clean the equipment after use.
Notice
• Power supply voltage in 100-240V range, Frequency 50/60Hz;
• The maximum load does not exceed 5kg (including fixtures);
• Speed setting range is 10-70 rpm;
• Permissible Ambient Temperature 5-40 ℃;
• Equipment Shell Protection Rating is IP21 to avoid use in humid or dusty environments;
• Clean the shell in time after use to prevent acid and alkali corrosion;
• Can be used in the refrigerator or Thermal Chamber, but ensure that the Ambient Temperature meets the requirements;
• Regularly check equipment components to ensure no abrasion and normal operation.
