Overview
HORIZON DLS-05 Electronic Tensile Tester is a professional testing equipment for tensile strength, fracture elongation, Modulus of Elasticity measurement of Plastic films, composite films and other materials, as well as disbonding, tearing, heat sealing strength and other performance tests.
Features
1. Operation mode of touch keys, LCD display multiple interfaces in real time
2. Can be pulled off and stopped and peak maintained, with overcurrent, overvoltage and overload protection
3. Can test tensile, heat sealing, disbonding, tearing and other items
4. Support constant elongation force value, constant force value to measure elongation, can display force value and displacement Linear dispersion
5. Single point speed regulation and stepless speed regulation (1-500mm/min)
The 60,000 joint adopts the structure of cross latch and has the function of swing angle limit to ensure concentricity and eliminate the influence of irregular samples
7. Control mode closed loop, high control accuracy
Principle
The testing machine applies precise force values through the closed-loop Control mode, measures the performance parameters of the material during the stretching process, such as tensile strength, fracture elongation, etc., and displays the test data and Linear dispersion in real time through the liquid crystal display.
Applications
Plastic film, composite film
Standards
GB/T13022、GB/T8808、GB 1040、GB/T4850、GB/T 16578、QB/T 2358、QB/T 1130
Steps
1. Connect the power supply and turn it on.
2. Select test methods and parameters
3. Install the specimen and fix it with a fixture
4. Start the experiment and observe the data in real time
5. View results and Linear dispersion after the test is completed
6. Use the micro printer to output the report
Notice
• Power supply voltage 220V +/- 10%
• Check whether the protective device is normal before use
• Install the specimen correctly to ensure concentricity
• Avoid overload operation to prevent equipment damage
• Regularly calibrate equipment to ensure Measurement accuracy
