Overview
The HORIZON BLJ-100 electronic disbonding testing machine is a single-arm structure testing equipment, suitable for disbonding, tensile, tearing, heat sealing strength and other performance tests of composite films, Adhesives, tapes and other materials.
Features
1. Single-arm structure
2. Can be pulled off and stopped, and the peak is maintained
3. Measurable disbonding, heat sealing, stretching and other items
4. Can be determined elongation force value, fixed force value to measure elongation, can display Linear dispersion (force value, displacement)
5. Single point speed regulation or stepless speed regulation (1-500mm/min)
6. Can be divided into four gears, each gear Measurement accuracy +/- 1%
7. Control mode closed loop, high control accuracy
Principle
The testing machine adopts closed-loop Control mode, through precise control of displacement speed (1-500mm/min) and force value measurement, to achieve material disbonding, tensile and other performance tests, can show the force value and displacement Linear dispersion.
Applications
Composite Film, Adhesive, Tape, Release Paper, Paper, Rubber, Plastic, Spinning & weaving, Water proofer, Non-woven Fabric, Wire, Foil, Sheet
Standards
GB/T2792、GB/T2790、GB/T8808
Steps
1. Select the Force Value Measurement range (optional 30N, 50N, 100N, 200N, 500N, etc.)
2. Set the displacement speed (1-500mm/min, single point or stepless speed regulation)
3. Test, can pull off the shutdown and peak hold
4. View Force and Displacement Linear dispersion
Notice
• Power supply voltage 220V +/- 10% V
• Make sure the equipment is within the load Measurement accuracy range of +/- 1% before testing
• Speed accuracy needs to be maintained at +/- 2%
• Use time-division four gears for measurement, each gear accuracy +/- 1%
