Overview
HORIZON DLS-05 Electronic Tensile Tester is a professional equipment for mechanical performance testing of Plastic films, composite films and other materials. The tester can measure tensile strength, elongation at break, Modulus of Elasticity, and supports disbonding, tearing, heat sealing strength and other performance tests.
Features
1. Adopt touch key operation and LCD real-time display, the interface includes test method selection, parameter setting, operation result display and Linear dispersion display
2. With pull-off automatic shutdown, peak hold function, integrated overcurrent, overvoltage, overload protection device
3. Support stretching, heat sealing, disbonding, tearing and other test items
4. Can realize fixed elongation force value, fixed force value to measure elongation, and display force value and displacement Linear dispersion
5. Flexible speed regulation, support single point speed regulation and stepless speed regulation, range 1-500mm/min
60,000 joint adopts cross latch structure and has swing angle limit function to ensure the concentricity of sample clamping and eliminate the influence of irregular sample
7. Control mode closed loop, high control accuracy
Principle
Electronic Tensile Tester uses the motor to drive the beam to apply tensile force to the sample, and uses Sensor to monitor the force value and displacement data in real time. The closed-loop Control system ensures the accuracy of the test process, the universal joint structure ensures the uniform force of the sample, and the test results are displayed on the LCD screen and support Linear dispersion analysis.
Applications
Plastic film, composite film
Standards
GB/T13022、GB/T8808、GB 1040、GB/T4850、GB/T 16578、QB/T 2358、QB/T 1130
Steps
1. Turn on the power and select the test method
2. Install the specimen in a standard fixture
3. Set test parameters such as speed, force value or elongation
4. Start the test, the device runs automatically and displays data in real time
5. Automatic shutdown after the test is completed, view and print the results
Notice
• Power supply voltage 220V +/- 10%
• Check whether the fixture is firmly installed before the test
• Avoid overload use and pay attention to the status of equipment protection functions
• Regularly calibrate force and displacement Measurement accuracy
• Clean equipment after use and store accessories properly
