Overview
HORIZON DLS-05 Electronic Tensile Tester is a device for material mechanical performance testing, suitable for the measurement of tensile strength, fracture elongation, Modulus of Elasticity of Plastic film, composite film and other materials, as well as disbonding, tearing, heat sealing strength and other performance tests.
Features
1. Operation mode of touch keys, LCD real-time display of test methods, parameters, results and Linear dispersion interface
2. With pull-off shutdown, peak hold function, integrated over-current, over-voltage, overload and other protection devices
3. Can test tensile, heat sealing, disbonding, tearing and other items
4. Support constant elongation force value, constant force value to measure elongation, and can display force value and displacement Linear dispersion
5. Flexible speed regulation, single point speed regulation or stepless speed regulation, range 1-500mm/min
60,000 joint adopts cross latch structure, with swing angle limit function, which is convenient for sample clamping and ensures concentricity, eliminating the influence of irregular sample on Sensor
7. Control mode closed loop, high control accuracy
Principle
The testing machine precisely adjusts the displacement rate through the closed-loop Control system, applies the force value to the sample, real-time measurement of the force value and displacement change in the process of stretching and disbonding, and displays the relevant data and Linear dispersion through the liquid crystal display to achieve accurate evaluation of material performance.
Applications
Plastic film, composite film tensile strength, fracture elongation, Modulus of Elasticity measurement, disbonding, tearing, heat sealing strength and other performance tests
Standards
GB/T13022、GB/T8808、GB 1040、GB/T4850、GB/T 16578、QB/T 2358、QB/T 1130
Steps
1. Connect the power supply and turn it on, select the test method and parameters
2. Install standard fixtures or optional configurations to hold the specimen
3. Set the displacement rate and start the test
4. Real-time observation of force value, displacement and Linear dispersion on LCD
5. After the test is completed, the equipment automatically stops and maintains peak value, and the results can be printed
Notice
• Power supply voltage 220V +/- 10% V to avoid overvoltage or undervoltage operation
• Check the fixture and universal joint before the test to ensure that the specimen is firmly clamped and concentrically
• Avoid overload use to prevent overload damage to the Sensor
• Regularly calibrate equipment to ensure Measurement accuracy meets +/- 1% requirements
• Turn off the power in time after use to keep the equipment clean
