Overview
HORIZON DLS-05 Electronic Tensile Tester is a professional equipment for the measurement of tensile strength, fracture elongation, resilience modulus of materials such as Plastic films and composite films. It can also perform performance tests such as disbonding, tearing, and heat sealing strength.
Features
1. Operation mode of touch key, LCD display multiple interfaces in real time.
2. Can be pulled off and shut down, peak holding, with overcurrent, overvoltage and overload protection.
3. Can test tensile, heat sealing, disbonding, tearing and other items.
4. Support constant elongation force value, constant force value to measure elongation, can display force value and displacement Linear dispersion.
5. Single point speed regulation or stepless speed regulation, speed range 1-500mm/min.
The 60,000 joint adopts the structure of cross latch and has the function of swing angle limit to ensure concentricity and eliminate the influence of irregular samples.
7. Control mode with closed loop, high control accuracy.
Principle
The device precisely applies force values through closed-loop Control mode, measures the performance parameters of the material during stretching, including force values, displacements and deformations, and displays test results and Linear dispersion in real time through a liquid crystal display.
Applications
Plastic film, composite film
Standards
GB/T13022、GB/T8808、GB 1040、GB/T4850、GB/T 16578、QB/T 2358、QB/T 1130
Steps
1. Connect the power supply and turn it on.
2. Select the test method and parameters.
3. Install the specimen to the standard fixture.
4. Set the speed and start the test.
5. Observe real-time display and Linear dispersion.
6. After the test is completed, the equipment automatically shuts down and remains peak.
7. Use the micro printer to output the results.
Notice
• Power supply voltage 220V +/- 10% V.
• Check whether the fixture is firmly installed before testing.
• Avoid overloading to prevent damage to the Sensor.
• Regularly calibrate equipment to ensure Measurement accuracy.
• Pay attention to safety during operation to prevent the sample from breaking and hurting people.