Overview
The HORIZON BLJ-100 electronic disbonding testing machine is a single-arm structural equipment suitable for disbonding, tensile, tearing, heat sealing strength and other performance tests of composite films, Adhesives, tapes and other materials.
Features
1. Single-arm structure
2. Can be pulled off and stopped, and the peak is maintained
3. Measurable disbonding, heat sealing, stretching and other items
4. Can be determined elongation force value, fixed force value to measure elongation, can display Linear dispersion (force value, displacement)
5. Single point speed regulation or stepless speed regulation (1-500mm/min)
6. Can be divided into four gears, each gear Measurement accuracy +/- 1%
7. Control mode closed loop, high control accuracy
Principle
The equipment adopts closed-loop Control mode, through precise control of displacement and force value, the material disbonding, tensile and other performance tests can be realized, and the force value and displacement Linear dispersion can be displayed in real time.
Applications
Composite Film, Adhesive, Tape, Release Paper, Paper, Rubber, Plastic, Spinning & weaving, Water proofer, Non-woven Fabric, Wire, Foil, Sheet
Standards
GB/T2792、GB/T2790、GB/T8808
Steps
1. Turn on the power supply and set the test parameters
2. Select test items (e.g. disbonding, stretching, etc.)
3. Set the displacement speed (single point speed regulation or stepless speed regulation)
4. Start the test, the device runs automatically and records data
5. Peak and Linear dispersion data can be viewed after the test is completed
Notice
• Power supply voltage 220V +/- 10%
• Check whether all parts of the equipment are normal before testing
• Select the appropriate test gear according to the material type
• Avoid overloading to prevent damage to the equipment
• Regularly calibrate equipment to ensure Measurement accuracy
