Overview
The HORIZON BLJ-100 electronic disbonding tester is a single-arm structural device suitable for testing disbonding, tensile, tearing, heat seal strength and other performance of a variety of materials.
Features
1. Single-arm structure
2. Can be pulled off and stopped, and the peak is maintained
3. Measurable disbonding, heat sealing, stretching and other items
4. Can be determined elongation force value, fixed force value to measure elongation, can display Linear dispersion (force value, displacement)
5. Single point speed regulation or stepless speed regulation (1-500mm/min)
6. Can be divided into four gears, each gear Measurement accuracy +/- 1%
7. Control mode closed loop, high control accuracy
Principle
The equipment adopts closed-loop Control mode, which precisely controls the displacement speed, measures the force value and displacement change of the material during disbonding and stretching, and displays the relevant Linear dispersion.
Applications
Adhesive film, Adhesive tape, Release paper, paper, Rubber, Plastic, Spinning & weaving, Water proofer, Non-woven fabric, Wire, Metal foil, Metal sheet disbonding, tensile, tearing, heat sealing strength and other performance tests
Standards
GB/T2792、GB/T2790、GB/T8808
Steps
1. Set test parameters, such as speed, gear, etc
2. Installation sample
3. Start the test and the device will run automatically
4. After the test is completed, view the force value, displacement Linear dispersion and peak data
Notice
• Power supply voltage within 220V +/- 10%
• Check whether the specimen is firmly installed before testing
• Test speed and grading according to material characteristics
• Regularly calibrate equipment to ensure Measurement accuracy
