Overview
YONGLIDA QTG 500-600 double-sided coating applicator is a double-edged coating applicator made of CR12 molybdenum vanadium material, with a U-shaped design and fast film. The film thickness of this product is 500μm/600μm, the effective application width is 80mm, and the total length is 100mm.
Features
1. Made of CR12 molybdenum vanadium material, strong durability
2. Double Blade Design, High Spreader Efficiency
3. U-shaped structure design, easy to operate
4. The film thickness can be 500μm or 600μm
5. Effective application width up to 80mm
Principle
The double-sided coating applicator forms a wet-film of the specified thickness by uniformly Spreader Coating on the substrate surface with a double-edged design. The U-shaped structure facilitates the rapid completion of the Spreader process, ensuring that the film thickness is precisely controlled at 500μm or 600μm.
Applications
Coating Spreaders, laboratory sample preparation, material surface preparation
Steps
1. Spreader Substrate and Coatings
2. Select the desired film thickness surface (500μm or 600μm)
3. Place the coating applicator on the substrate
4. Apply pressure evenly and push the coating applicator
5. Clean coating applicator after Spreader
Notice
• Make sure the coating applicator is clean and pollution-free before use
• Spreader at a uniform speed
• Select the appropriate film thickness surface according to requirements
• Clean and maintain in time after use
• Avoid contact with corrosive substances
