Overview
The BIO0021 PUR000010 laboratory pure water system uses highly recycled reverse osmosis (RO) (RO) technology to effectively remove 99% of contaminants in tap water and produce primary water (vessel-grade water). The system can directly supply pure water to the Glass Washing Machine and Miscellaneous Equipment in the laboratory, and can produce 10-1000 liters of industrial-grade water/RO water per day. The built-in booster pump simplifies installation and avoids reduced water production due to poor water supply pressure and damage to filtrated consumables.
Features
1. Low operating costs
2. Pure water replenishment rate 10-80 liters/hour
3. New recycling system extends the life of reverse osmosis (ROS) membranes
4. Can be installed on the top of the workbench, wall and water storage tank
5. Water storage tanks can be selected with 30-liter, 60-liter and 100-liter capacities
6. Filters are easy to replace
7. Environmental design, water collection rate up to 50%, less waste water
8. After measurement of conductivity, the water that does not meet the requirements is recirculated and filtered
Principle
The system removes 99% of the contaminants in the supply water (tap water) through high recovery reverse osmosis (RO) (RO) technology to produce primary pure water. The built-in booster pump ensures stable water supply pressure and avoids damage to filtrating consumables. Using an innovative recirculation system, water with unqualified conductivity is reflowed to continue to filtrate, improving water collection rate and reducing wastewater discharge.
Applications
Glass washing machine, autoclaving machine, steam generator, incubator, preparing higher grade purified water
Steps
1. Install the system on the top of the workbench, wall or water storage tank
2. Connect the water supply (tap water) pipe
3. Select the storage tank capacity (30 liters, 60 liters, or 100 liters) as required.
4. Start the system for pure water production
5. Change Filters Regularly
Notice
• The water supply pressure should be kept within the range of 0.1~ 6 bar
• Regularly check Filter status and replace it in time
• Make sure the system is installed in the right location (bench, wall or top of water storage tank)
• Pay attention to the effect of water temperature on productivity (parameters are based on 15 ° C conditions)
• Water with substandard conductivity will automatically return to circulation without manual intervention
