Overview
The BIO0021 PUR000080 laboratory pure water system uses highly recycled reverse osmosis (RO) (RO) technology to effectively remove 99% of contaminants in tap water and produce primary water (dish-grade water). The system can produce 10-1000 liters of industrial-grade water/RO water per day, which can directly supply pure water to laboratory glassware washers and Miscellaneous equipment. The built-in booster pump simplifies installation and avoids reduced water production due to poor water supply pressure and damage to filtrated consumables.
Features
1. Low operating costs
2. Pure water replenishment rate 10-80 liters/hour
3. New recycling system extends the life of reverse osmosis (ROS) membranes
4. Can be installed on the top of the workbench, wall and water storage tank
5. Water storage tanks are available in 30-liter, 60-liter and 100-liter capacities
6. Filters are easy to replace
7. Environmental design, water collection rate up to 50%, less waste water
8. Non-compliant water reflux circulation filtrate
Principle
The system removes contaminants from the water through high recovery reverse osmosis (RO) technology to produce primary pure water. The built-in booster pump ensures a stable water supply pressure and avoids damage to filtrating consumables. An innovative recirculation system is adopted to re-flow the water that does not meet the requirements after measurement conductivity to the system to continue to filtrate, improving the water collection rate.
Applications
Glass washers, autoclaving machines, steam generators, incubators, laboratory equipment water supply, high-grade purified water prepatives
Steps
1. Select the installation location (bench, wall or top of water storage tank)
2. Connect the water supply pipe
3. Select the storage tank capacity as required
4. Start the system for pure water production
5. Change Filters Regularly
Notice
• Water supply pressure should be kept within 0.1-6 bar
• Regularly check Filter status and replace it in time
• Make sure the system is installed in the right location
• Pay attention to the effect of water temperature on productivity (specifications are based on 15 ° C conditions)
• The storage tank capacity needs to be selected according to actual needs
