Overview
PN-PCTF cup body stiffness tester is a paper cup stiffness testing instrument designed and developed according to the national standard GB/T 27590. It is suitable for paper cups containing cold and hot beverages and ice cream with paraffin wax, polyethylene (PE) film and other substances on the surface. Physical properties testing equipment for paper cup manufacturers, food companies and Quality control departments.
Features
1. Adopt new module circuit design, with WIFI Internet of Things function. After networking, the test results can be saved to the Cloud as a Service, queried and generated reports through a dedicated QMS quality management system;
2. One-click operation during the experiment to avoid human error.
3. Touchscreen display, point and touch the corresponding position to operate, easy to use;
4. The relative distance between the two measurement heads can be preset on the Touchscreen to save test time;
5. Built-in Printer to facilitate the output of test data;
6. The movable bench can be lifted and locked, suitable for samples of different heights.
7. The instrument has an over-range prompt function;
8. With statistical function, display average, MAX Maximum, MIN Minimum, Standard Deviation and Coefficient of Variation.
Principle
Put the pressure rod block into the sample cup, and place it on the movable stand of the cup body stiffness tester together with the sample cup, so that the left measurement head and the right measurement head just contact the side wall of the cup, adjust the movable stand so that the vertical distance between the probe and the bottom of the cup is about two-thirds of the height of the cup, and the seam of the cup body to be tested is facing the tester. Start the instrument to test the stiffness of the cup body.
Applications
Paper cup manufacturers, food companies, Quality control departments
Standards
GB/T 27590、QB/T 5023
Steps
1. Put the pressure rod block into the sample cup, and place it on the movable bench of the cup body stiffness tester together with the sample cup;
2. Make the left measurement head and the right measurement head just contact the side wall of the cup;
3. Adjust the movable stand so that the vertical distance between the probe and the bottom of the cup is about two-thirds of the height of the cup, and make the cup body seam of the paper cup to be tested face the tester;
4. Start the instrument and test the stiffness of the cup body.
Notice
• Ensure that the instrument is used in a working environment with indoor temperature (20 +/- 10) ° C and relative humidity < 85%.
• Measurement range of the instrument is 1~ 20N to avoid over-range use.
• Before the test, the relative distance between the two measurement heads can be preset on the Touchscreen as required.
• The movable bench can be lifted and locked to accommodate specimens of different heights.
• Pay attention to maintenance after use.