Overview
PN-CT50KAF FCL Compression Testing Machine is an economical testing instrument, mainly used for compression and stacking experiments of various small-size corrugated boxes, honeycomb cartons and other Encasement parts with compressire strength less than 15kN. The instrument conforms to GB/T 4857.3, GB/T 4857.4, ISO 12048, ISO 2234 and other standards, and is suitable for testing Encasement such as food and beverage, instant noodles, cosmetics, beer, grain and oil. The instrument has three Operating Modes: tensile test, fixed value test and stacking test.
Features
1. Adopt new module circuit design, with WIFI Internet of Things function, can save test results to Cloud as a Service, query and generate reports through QMS quality management system.
2. Real-time display of pressure and deformation Linear dispersion.
3. Pre-set parameters, one-key measurement, simple operation.
4. With statistical function, it can display the average, MAX Maximum, MIN Minimum, Standard Deviation and Coefficient of Variation.
5. Equipped with safety devices: overload emergency stop button, up and down limit control, overrange prompt function.
6. Modular design is used in the control circuit section for easy maintenance.
7. Double screw, double column mechanical structure, good parallelism, Stability, rigidity, long service life.
8. Adopt imported stepper motor control, use subdivision technology, accurate positioning, fast Response, high test efficiency.
9. Using high-speed ARM processor and 24-bit AD converter, the data processing speed is fast and the accuracy is high.
10. Built-in thermal printer for easy printing of test reports.
11. Computer software can be connected, and test data can be exported to EXCEL, which is convenient for data storage, analysis, and management.
Principle
The instrument applies pressure to the specimen through the motor-driven platen. In the tensile test mode, the initial load is applied to the specimen as the starting point of deformation, and the pressure and deformation amount are automatically recorded. In the fixed value test mode, the performance of the box is detected according to the set pressure and deformation amount. In the stacking test mode, the warehouse stacking state is simulated, and the timing and deformation amount are calculated after the pressure is pressurized to the predetermined pressure. When the pressure drops to 2% of the set value, the system automatically pressurizes to the test load and maintains it until the specified stacking time is reached or the sample pressure reaches the set deformation amount.
Applications
Food and Beverage Encasement, Instant Noodles Encasement, Cosmetics Encasement, Beer Encasement, Grain and Oil Encasement
Standards
GB/T 4857.3、GB/T 4857.4、ISO 12048、ISO 2234、QB/T 1048
Steps
1. Tensile test: The sample is placed between the pressure plates, the instrument applies an initial load and uses this as the starting point of deformation, and then continues to press until the sample is crushed, automatically recording the pressure and deformation.
2. Fixed value test: According to the set pressure and deformation parameters, the sample is pressurized to detect the overall performance of the box.
3. Stacking test: Set parameters such as stacking pressure and time, stop when the sample is pressurized to a predetermined pressure under the upper pressure plate, start timing and calculate the deformation of the sample; the system monitors the pressure change, and automatically pressurizes to the test load when the pressure drops to 2% of the set value and maintains it until the specified stacking time is reached or the sample pressure reaches the set deformation amount, and the test automatically terminates.
Notice
• Please ensure that the power supply is AC220V +/- 10% 5A 50/60Hz (AC110V optional) and is properly grounded.
• Instrument working environment should be kept at indoor temperature (20 +/- 10) ℃, relative humidity < 85%.
• Before testing, please confirm that the sample size meets the requirements of the platen size (1000 * 1000mm).
• Please pay attention to safety during operation and do not place any part of your body between the upper and lower pressure plates.
• When the instrument prompts overload, overrange or reaches the limit, please stop the operation immediately and check.
• Regularly check the lubrication and abrasion of mechanical structures such as lead screws and guide posts.
When using a thermal printer, make sure there is sufficient printing paper.
When connecting the computer or using the WIFI function, please ensure that the interface and network connection are stable.
