Overview
MUXUAN MS-B8 Laboratory High Shear Mulser is an experimental equipment that integrates dexterity, convenience and high scalability. It uses German high-speed motors, Rotation speed up to 28000rpm and line speed up to 27m/s, which can easily meet a variety of high-demand dispersion, emulsification and homogenization experimental needs.
Features
1. Adopt German high-speed motor, stable performance, can run for a long time.
2. Speed range is wide, up to 28000rpm, line speed up to 27m/s.
3. The whole machine adopts Modular structure, which is easy to operate, has strong expansibility, and can be equipped with a variety of working heads.
4. The working head material is stainless steel 316 #, the bearing material is PTFE, corrosion resistance, suitable for a variety of materials.
5. It can complete various processes such as dispersion, emulsification, homogenization, grinding, mixing of high viscosity materials and tissue crushing.
Principle
The equipment drives the working head (rotor/stator set) at high speed swirl/spin through a high-speed motor to generate a strong shear force. The material is subjected to high-frequency mechanical action in the narrow gap between the rotor and the stator, so as to achieve rapid dispersion, emulsification, homogenization or crushing between solids and liquids or liquids and liquids.
Applications
Fine Chemicals, Petrochemicals, Biomedical, Coating inks, Pesticides, Nanomaterials, Food Industry, Daily Chemicals
Steps
1. Choose the appropriate configuration according to the viscosity (≤ 5000 cps) and volume (10~ 60mL standard Processing capacity) of the processing material.
2. Install the selected work head (25G work head is standard, Miscellaneous models need to be selected according to the selection table).
3. Immerse the working head into the material, with a maximum immersion depth of no more than 100mm.
4. Power on (AC220V 50/60Hz).
5. Through the scale stepless speed control knob, gradually adjust from low speed (7000rpm) to the desired Rotation speed (maximum 28000rpm).
6. During operation, ensure that the material temperature does not exceed the maximum allowable operating temperature of the working head by 120 degrees Celsius.
7. After finishing processing, turn off the power and clean the equipment.
Notice
* Rated voltage of the device is AC220V 50/60Hz, please make sure the power supply matches.
When operating, the height of the working head immersed in the liquid must not exceed 100mm.
The viscosity of the treated material should not exceed 5000 cps (mPa · s).
Equipment operation and material temperature must not exceed 120 degrees Celsius.
* Do not use with Ambient Temperature greater than 40 ° C or relative humidity greater than 80%.
* According to Processing capacity (0.2mL~ 5000mL) and process requirements, refer to the selection table to select the appropriate line speed and working head model.
The working head is made of 316 stainless steel and the bearing is made of PTFE. Please ensure compatibility with the material.
* When the device is running, do not touch the working head part of the high-speed swirl/spin.
