Overview
MUXUAN MXF-CD055 Experimental Chinese Small Batch Dispersion Stirrer is a small batch dispersion and mixing equipment suitable for laboratory and production. It is driven by a high-performance variable frequency motor or a three-phase asynchronous motor, and can choose different Speed ranges (such as 0-1500/3000/5000/8000 rpm) according to material viscosity and Processing capacity. It has the advantages of small size, large Power, stable Rotation speed, variable frequency speed regulation, high efficiency, low energy consumption, low noise, and smooth operation, which improves the working environment.
Features
1. Adopt a high-performance motor for lower noise and smoother operation, ensuring the high quality of the entire machine.
2. Digital dynamic Rotation speed frequency conversion control, can be selected according to the process needs of timing, motor explosion-proof, explosion-proof machine, sound and light alarm configuration.
3. The lifting method is flexible, divided into manual lifting and electric lifting.
4. Mixing methods are diverse, including paddle type, tooth plate type and blade type, which can be selected according to the process needs, and the replacement is simple and convenient.
Principle
The equipment drives the stirring shaft through a high-performance variable frequency motor or a three-phase asynchronous motor, which drives the high-speed swirl/spin of the Impeller (such as paddle type, toothed disc type, blade type) installed on the shaft end. In the container, the Impeller has a strong shearing, Impact and dispersion effect on the material, so as to realize the dispersion, mixing, dissolving and stirring of the material. Rotation speed can be precisely controlled through the frequency converter to adapt to different viscosity and process requirements.
Applications
Biology, Cosmetics, Food, Coating paints, inks, Adhesives, dyestuffs, pesticides
Steps
1. Select the appropriate Impeller (paddle type, toothed disc type or blade type) according to the material characteristics and Processing capacity (0.5-30 L) and install it.
2. Place the material in the container and adjust the equipment lift (manual or electric) to the appropriate height as needed to immerse the Impeller in the material.
3. Turn on the power supply (220/380V) and set the required Rotation speed (within the range of 0-1500rpm) through the digital display frequency conversion controller.
4. Start the equipment and start the dispersion and mixing operation.
5. After the job is completed, turn off the power, raise the Impeller, and clean the equipment.
Notice
• This machine is suitable for material viscosity ≤ 25000 cps.
• Select the appropriate container and Impeller based on capacity (0.5-30 L) and processing requirements.
• Power supply voltage (220/380V) matches equipment requirements before operation.
• Please pay attention to safety when operating lifting and stirring components and avoid physical contact.
• According to the process needs, safety configurations such as timing, explosion-proof or sound and light alarm can be considered.
• Please clean it in time after use to keep the equipment in good condition.