Overview
The MUXUAN MXF-CD055 experimental small batch dispersion Stirrer is driven by a high-performance variable frequency motor or a three-phase asynchronous motor, and can choose different Speed ranges (0-1500/0-3000/0-5000/0-8000 rpm) according to material viscosity and Processing capacity. The equipment has the advantages of small size, large output power, stable Rotation speed, low energy consumption, low noise, and high Stability, which improves the working environment of users. It is an upgraded product suitable for laboratory and production use.
Features
1. High-performance motor, lower noise, smoother operation, ensuring high quality of the whole machine.
2. Digital dynamic Rotation speed frequency conversion control, can be selected according to the process needs of timing, motor explosion-proof, explosion-proof machine, sound and light alarm configuration.
3. Lifting methods are divided into manual lifting and electric lifting.
4. Mixing methods are diverse, including paddle type, tooth plate type, blade type, which can be selected according to the needs of process production, and the replacement is simple and convenient.
Principle
The equipment drives the stirring shaft through a high-performance variable frequency motor or a three-phase asynchronous motor to drive different forms of Impeller (such as paddle type, toothed disc type, blade type) high-speed swirl/spin to disperse, mix, dissolve, stir and other operations on the material. Rotation speed can be accurately adjusted and displayed through the variable frequency Control system to adapt to the process requirements of different viscosity and processing capacity.
Applications
Biology, Cosmetics, Food, Coating paints, inks, Adhesives, dyestuffs, pesticides
Steps
1. Select the appropriate Impeller form according to the material viscosity and Processing capacity and install it.
2. Place the material container under the Impeller and adjust the Impeller to the appropriate height by manual or electric lifting mechanism.
3. Turn on the power supply and set the required Rotation speed through the digital display variable frequency controller.
4. Start the equipment and start dispersing, mixing, dissolving or stirring the material.
5. After the operation is completed, turn off the power of the device, raise the Impeller, and clean the device.
Notice
• Material viscosity should be ≤ 25000 cps, Processing capacity should be within 0.5-300 L range.
• Select the appropriate Impeller form and lifting method according to the process needs.
• Power supply voltage (220/380V) matches equipment requirements before operation.
• When the equipment is running, please pay attention to safety and avoid contact with swirl/spin parts.
• Explosion-proof, timing, sound and light alarm and other configurations can be selected according to requirements to meet specific working conditions.
