Overview
The MUXUAN MXF-20L three-axis dispersion mixing mixer is a high-efficiency mixing equipment designed for high-viscosity materials. The kettle is equipped with three different forms of Stirrer, which exerts strong shearing and mixing effects on the material through the combined movement of low-speed revolution and high-speed rotation. The equipment is equipped with a mountain-shaped wall scraper, which can effectively scrape off the adhesive materials on the wall and bottom of the kettle to ensure uniform mixing. The machine has good sealing performance, supports vacuuming operation to remove bubbles, and can use electric heating or water Cooling mode to adjust the temperature. The design of the hydraulic lifting of the cylinder head and the free movement of the cylinder body makes the operation convenient and flexible.
Features
1. The unique sealing structure can be mixed and stirred in a vacuum environment to effectively eliminate bubbles in the material.
2. The kettle body supports electric heating, steam heating and oil-water circulation heating, the inner coil of the jacket can be cooled down, and the temperature control is flexible.
3. The inner wall is finished by a large vertical lathe, and the scraping shaft with frame type stirring is matched to ensure that the material is completely scraped off the wall and bottom of the kettle, and there is no dead angle when mixed.
4. Equipped with two sets of high-speed dispersion shafts, it produces strong shearing and dispersion effects on the material, and the mixing efficiency is several times that of ordinary mixers.
5. The high-speed disperser adopts frequency conversion speed regulation, which can flexibly adjust the Rotation speed according to different processes and material viscosity.
6. The cylinder head can be hydraulically lifted, the cylinder body can be moved freely, and the operation is convenient. A hydraulic extruder can be customized to facilitate the extrusion and discharge of high-viscosity paste materials.
Principle
There are three Stirrers in the equipment kettle. One of the low-speed Stirrers rotates around the axis of the kettle body, and the other two high-speed stirringdevices rotate around their own axis at high speed at different Rotation speeds. This compound movement allows the material to perform complex movements in the kettle, undergoing intense shearing and mixing. At the same time, the mountain-shaped wall scraper rotates with the shaft, constantly scraping off the raw materials adhered to the wall and bottom of the kettle and re-entering the mixing area to further improve the mixing effect. In a vacuum environment, the process can also effectively remove bubbles in the material.
Applications
Adhesive, sealant, mold glue, silicone sealant, organic silica gel, polyurethane sealant, anaerobic glue, sealing glue, ointment, electronic Stock, lithium ion battery slurry, gluing agent, pigment, inks, ointment paste material, grease, paints, paste cosmetics, additives and other high viscosity preparations. Suitable for multi-component solid-solid, solid-liquid, liquid-liquid phase materials mixing, reaction, dispersion, dissolving, quenching and tempering processes.
Steps
1. Raise the cylinder head through the hydraulic system.
2. Push the movable material cylinder to the working position.
3. Add the required materials.
4. Lower cylinder head and ensure sealing.
5. Start vacuuming, heating or chilling down as needed.
6. Start the low-speed stirring and high-speed dispersion motor, and adjust the high-speed dispersion Rotation speed to the process requirements through the frequency converter.
7. After mixing, stop stirring.
8. Raise the cylinder head and move the cylinder to the hydraulic extruder position for discharge (if configured).
Notice
• Before operation, please check whether the parts of the equipment are in good condition and whether the sealing is effective.
• Rotation speed and mixing time are reasonably set according to material characteristics and process requirements.
• When vacuuming or heating, ensure that the relevant pipelines and interfaces are firmly connected.
• When the equipment is running, do not put your hands or Miscellaneous objects into the stirrer.
• Regularly maintain the equipment and check the abrasion of the scraper.
• Please pay attention to safety when moving the material cylinder to avoid collisions.
• This product laboratory model is only suitable for experimental and small batch trial production.
